694795

Lenco SCD-685 Manual

14
Zoom out
Zoom in
Previous page
1/68
Next page
14
BLUETOOTH AUDIO
Please follow the pairing instructions below to link the unit to your Bluetooth device.
1. Press the SOURCE button repeatedly to enter the Bluetooth mode. The display will show “BT”. It will start searching
and will keep flashing.
2. If the unit has never been paired with a Bluetooth device before or cannot find the last paired device, the display and
the Bluetooth status indicator will keep on flashing. Turn on the Bluetooth function of your device and enable the
search until “Lenco SCD-685” is found. Select “Lenco SCD-685” on the Bluetooth device to make connection. Enter
the pass code “0000” if required.
3. After successfully paired the unit will display steady “BT” without flashing.
4. You can now start playing music from your smartphone wirelessly to the speaker.
5. You can press the button to pause or resume the playback.
6. You can press the PREVIOUS or NEXT button to search to the previous or next song.
 Press the PAIR button on the remote control (or press and hold the PAIR button on the unit) will disconnect the
current connection and start to search another new Bluetooth device
AUX IN
This allows you to connect an external player’s sound through your unit.
1. Plug a 3.5mm audio cable (not included) into your external player’s line out and the other end into the AUX jack.
2. Press the SOURCE button to enter AUX mode. Display shows “AUX”
3. Start your external player to play music.
4. The unit will output the sound.
ENERGY SAVING
Due to ErP stage 2 requirement and protect the environment, the unit will turn off to the standby mode automatically once
no music has been playing around 15 minutes.
To reactivate the unit, press the STANDBY button to turn on the unit.
CLOCK SETUP
You can set the clock.
1. Turn off the unit to Standby mode.
2. Press and hold the MENU button, it will show the time display format.
3. Press the TUNE- or TUNE+ button to toggle between 24Hour or 12 Hour display format. Press the MENU button
to continue.
4. The Hour digits will flash. Press the TUNE- or TUNE+ button to change the hour value. Press the MENU button to
continue.
5. The Minute digits will flash. Press the TUNE- or TUNE+ button to change the minute value. Press the MENU
button to complete the setup.
 The clock setting may automatically be overridden by the DAB or FM station broadcast real time information.
SOFTWARE VERSION CHECK
You can check the unit software version.
1. Turn on the unit in DAB mode or FM mode.
2. Press the MENU button to access the menu control.
3. Press the TUNE- or TUNE+ button until “SW Version” is displayed and then press the ENTER button to show the
software version number.
4. Press the MENU button to exit the menu control.
LANGUAGE SETUP
You can set the unit’s language.
1. Turn on the unit in DAB mode or FM mode.
2. Press the MENU button to access the menu control.
3. Press the TUNE- or TUNE+ button until “Language” is displayed and then press the ENTER button.
4. Press the TUNE- or TUNE+ button to toggle between different languages. Select your desired language and then
press the ENTER button to confirm.
5. Press the MENU button to exit the menu control.
FACTORY RESET
This function resets the unit to the original factory settings.
1. Turn on the unit in DAB mode or FM mode.
2. Press the MENU button to access the menu control.
3. Press the TUNE- or TUNE+ button until “Factory Reset” is displayed and then press the ENTER button.
4. Press the TUNE- or TUNE+ button until “<Yes>” is displayed and then press the ENTER button to reset the unit.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco SCD-685 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco SCD-685 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info