694795

Lenco SCD-685 Manual

12
Zoom out
Zoom in
Previous page
1/68
Next page
12
FM RADIO OPERATION
Auto Scan
1. Turn on the unit in FM mode.
2. Press the SCAN button to scan for the next available FM station.
Manual Scan
1. Press the TUNE- or TUNE+ button repeatedly to tune to a different frequency.
2. Alternatively press and hold the TUNE- or TUNE+ button to automatically search to the next available station.
Storing FM Presets
You can save up to 20 FM stations.
1. Tune to the station you wish to store.
2. Press and hold the PRESET button. Flashing preset channel number will be displayed.
3. Press the TUNE- or TUNE+ button to a preset number that you want to store. Then press the ENTER button to
save.
Recall FM Presets
1. Press the PRESET button. Steady preset channel number will be displayed.
2. Press the TUNE- or TUNE+ button to a preset number that you want to recall. Then press the ENTER button to
tune to the preset channel.
Stereo/Force Mono Selection
When receiving a stereo broadcast FM station, press the FM ST/MO button will switch between stereo audio or force
mono audio.
Displaying FM Station Information
There are several types of information as listed below. To change the display information press the INFO button
repeatedly.
1. Radio Text
Scrolling text with information on music titles or program details provided by the broadcaster.
2. Program Type (PTY)
Type of program provided by the broadcaster.
3. Signal Strength
The signal strength bar is displayed to show the current receive signal strength. The more the rectangles are filled, the
stronger the signal is received. The unfilled rectangle on the left side is a threshold level where the signal strength
received should exceed this threshold. To improve the reception adjust the antenna position.
4. Time and Date
The real time and current date provided by the broadcaster.
5. Frequency
Current channel frequency.
OTHER FM MENU OPERATION
Press the MENU button to access the menu control. Then press the TUNE- or TUNE+ button for different options as
described below.
Scan Setting
1. Press the MENU button to access the menu control.
2. Press the TUNE- or TUNE+ button until “Scan setting” is displayed and then press the ENTER button.
3. Press the TUNE- or TUNE+ button to toggle between “All stations” or “Strong only” selections and then press the
ENTER button confirm. When “All stations” is selected, all stations will be detected during FM scanning even if the
radio station is noisy. When the “Strong only” is selected, only the strong stations are detected. Scanning will ignore
those noisy stations.
4. The next time doing a FM scan the unit will search for the stations based on this confirmed setting.
5. Press the MENU button to exit the menu control.
Audio Setting
1. Press the MENU button to access the menu control.
2. Press the TUNE- or TUNE+ button until “Audio Mode” is displayed and then press the ENTER button.
3. Press the TUNE- or TUNE+ button to toggle between “Stereo” or “Mono” selection and then press the ENTER
button confirm.
4. Press the MENU button to exit the menu control.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco SCD-685 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco SCD-685 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info