Manual Lenco PDR-051 (page 6 of 31) (English, German, Dutch, French, Spanish)

792981

Zoom out

Zoom in

1/31

11 12

What can you do if you do not have direct DAB+ recepon.

• Always point the antenna straight up vercally ﬁrst.

• Do not place the radio too close to potenal sources of interference such as, baery chargers, rotang machinery,

computers, large metal surfaces, etc.

• Move the radio a few meters.

• Turn on the radio and acvate a full scan in the DAB+ menu

• In the display of the radio you will see the progress of the scan and the number of staons found in the current

posion of the radio.

Important

• With DAB+ recepon, there can be a very big diﬀerence in recepon level between one locaon and "a few meters

away". In case of a local weak DAB+ signal, move the radio to ﬁnd a stronger signal.

• If you take the radio to another locaon, perform a full scan again. This will show you which DAB+ staons can be

received there.

FM Funcon

Turn the PDR-051 on and switch to FM Radio mode

Long press the enter buon to start autoscan, which searches and stores the radio staons found. Rotate skip to highlight the

saved radio staons and press ENTER to play the desired staon

Short press INFO/MENU buon to view informaon about the current staon, Text informaon, program type, set name,

channel informaon, EQ type, baery level, me and date.

Saving a FM staon as Preset

Press and hold the PRESET buon to enter the radio staon preset-store interface. Rotate SKIP to move the preset-store

posion up and down. Rotate "SKIP buon and ENTER to store the radio staon to the current posion. Short press the

PRESET buon to enter the radio staon recall interface and then Rotate SKIP to select a preset-stored radio staon. press

the ENTER buon to conﬁrm and play.

You also use the 0-9 number buons on the remote control to select the preset-stored radio staon for play.

Note: A total of 40 staons are available.

AUX mode

You can connect any audio device through the 3.5mm AUX in connector by the 3.5mm audio cable.

Playback USB/SD card

Power the PDR-051 on and press "MODE" buon several mes unl USB (or SD) appears on the display and then you can

play music by inserng USB sck or Micro SD card songs with MP3, WAV, FLAC, WMA, APE.

Rotate VOLUME to adjust the volume Short press VOLUME to toggle mute on and mute oﬀ.

Rotate SKIP to switch Previous or next track rotate and hold skip buon to rewind and fast forward the song short press the

ENTER to play or pause.

You also use the 0-9 number buons on the remote control to select songs for playback.

During playback, Short press INFO/MENU to view the currently playing song informaon (song name, current track/total

track, current playing

me/total current track me date, etc)

Bluetooth mode

1. Short press the MODE buon several times unl “BT” appears on the display. Aer a few seconds it will display the text

“Disconnected”. (if no device was paired before). The unit is ready for Bluetooth connecons.

2. To connect your Bluetooth device, The ﬁrst open the Bluetooth conﬁguraon on your smartphone or other Bluetooth

device, Then scan or search the device “Lenco PDR-051”, click to connect with “Lenco PDR-051”. The Bluetooth

connecon will be made and your smartphone or other Bluetooth device can be used with your Lenco PDR-051.

3. Now you can use your favorite streaming service app or local music app on your smartphone or other connected

Bluetooth device to play music through the Lenco PDR-051 speakers.

4. You can short press ENTER to pause/play and use the SKIP+/SKIP- to play the next or previous song.

5. The volume can be adjusted with the VOLUME+/VOLUME- buon. (please note that in most cases you ﬁrst need to turn

up the volume to max on the connected smartphone or other connected bluetooth device)

Bluetooth hands-free call.

When receiving a phone call while Bluetooth music is playing, the music will stop. A ring sound will be heart and a message

will be displayed on the screen. Short press SKIP or the ENTER buon to answer the call. The display will show ‘HFP RUN’.

You can speak trough the internal microphone on the front of the PDR-051

To end the conversaon, Short press SKIP or the ENTER buon.

To reject an incoming call, long presses “SKIP” or “ENTER” when the call comes in.

NOTE:

This product has a bluetooth recepon funcon, you can not transmit any bluetooth sound with it: this means

that you can receive wirelessly a bluetooth sound signal from an external source like a smartphone.

Power supply adaptor (For EU only)

Use only the power supply listed in the user instrucons.

Informaon Value and and precision

Manufacturers name or trade mark, commercial

registraon and address

Shenzhen Fushigang

Technology Co., Ltd

Model Idenﬁer AS0601A-0500600EUU

Input voltage 100V~240V AC

Input AC frequency 50Hz/60Hz

Output voltage DC 5,0V +/-5%

Output current 0,6A

Output Power 3,0W

Average acve eﬃciency ≥69,64%

Eﬃciency at low load (10%) ≥61,05%

No load Power consumpon ≤0,1W

Product Speciﬁcaon

 Output power Max: 6W

 S/N rao: ≥70dBA

 Distoron: ≤1%

 Frequency Response: 100HZ-18KHZ

 Audio input mode: DAB, FM, BT, USB, TF, AUX

 Driver unit: 52mm internal magnesm (4Ω/3W*2)

 Baery: 18650 3.7V/1800mAh lithium-ion baery

 USB/Micro SD maximum input sensivity: 0dBm

 DAB receive input sensivity: -95dBm

 FM receive input sensivity: -105dBm

 Working temperature: -10ºC-50 ºC

 Storage temperature: -20ºC ~ +70 ºC

 Unit size: 110mm/145mm/80mm

 Net weight: About 760 g

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco PDR-051 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 15.92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco PDR-051 Manual

Product: