792981

Lenco PDR-051 Manual

5
Zoom out
Zoom in
Previous page
1/31
Next page
9 10
Using Your Radio
Power on/off using DAB Mode for the first me:
When using The PDR-051 extend the antenna full for the best FM/DAB radio signal.
Shortpress STANDBY to turn on the radio to automacally enter the DAB mode. If this is the first me the radio has entered
DAB mode, it will automacally search for and store DAB staons which are available in your local area.
The radio will automacally synchronize me and date with the DAB signal found. Aer the search has finished rotate the
skip knob to select a staon and press ENTER to confirm. The selected staon will start to play.
FM radio
Press MODE to switch to Fm mode. In FM mode, press and hold the enter buon to start autoscan which searches and stores
the radio staons found. If the recepon signal should be adjusted, you can rotate SKIP +/- to adjust the frequency manually.
You can store youre favorite radiostaon as preset by longpress the PRESET buon. Rotate SKIP to select the preset number
you want to store it and then press ENTER to save it to the selected locaon. To select a previously saved preset, short press
PRESET to show the preset list, then Rotate SKIP to select the radio staon frequency and press ENTER to confirm your
selecon.
Standby:
Short press STANDBY to enter the STANDBY mode whilst using any playbackmode. When in Standby mode the display will
only show the me/date and (acve) alarms set.
In Standby mode, you can press INFO/MENU to set the me, date, alarm and other sengs.
To turn on the device again short press STANDBY again.
Long press STANDBY to turn the PDR-051 fully off. No me, date, alarm will be shown and the acve alarms won’t be
triggered.
NOTE: Only use the standby mode when the PDR-051 is connected to the mains poweradaptor.
Charging:
The PDR-051 can be charged while either powered on or off, It is recommended to use the supplied charger (output: 5VDC,
600mA) use the supplied micro USB cable for charging. The indicator LED light on the back is red when charging and the
indicator light is green when the baery is fully charged.
Menu Sengs
In the different playback modes, you can long press INFO/MENU to enter the menu sengs of the acve mode. Rotate SKIP
+/- to highlight a submenu item and press ENTER to enter the submenu. If there is only one menu in the sub-menu, press
ENTER to confirm the highlighted opon. To return to the previous menu press INFO/MENU.
Seng the date and me manually
If the PDR-051 can’t find a signal to synchronise the me automac, you can set the me and date manually.
To do this press and hold INFO/MENU or press and hold ALARM&CLOCK, rotate SKIP to select Time/Date and press ENTER.
Rotate SKIP to adjust the date. Press ENTER to confirm and then repeat to set the Month, Year, Hour and minute
Aer you've set the date and me the menu will automacally exit to the previous menu. The me/date you have set will be
saved automacally. Press "INFO/MENU" to return step by step or long press Info/Menu to exit the menu.
Auto Update/Set 12/24 Hour/Set Date Format opons
Set Time/Date: Set Hour system, Set Date Format, Auto update
Set Time/Date Set Time/Date. o1-01-2021 0.0=00
Auto Update: Select Update from Radio or No Update
Set Hour System: Select 12Hour or 24Hour
Set Date Format: Select dd-mm-yyyy, mm-dd-yyyy, yyyy-mm-dd
Alarm clock Sengs
To set the alarm clock short press clock ALARM to enter the alarm seng interface, Rotate SKIP to select alarm 1 or alarm 2,
3 or 4. Aer selecng the desired alarm short press the ENTER and rotate SKIP to select:
Time/Source/Repeat/Volume/ON/OFF seng opons.
Time: Select the me by rotang SKIP and then press ENTER to confirm
Alarm me: 15/30/45/60/75/90/120 minutes
Source: FM, DAB, Buzzer, SD, USB
Repeat: There are Once/Daily/Weekends/Workday opons
Volume: Select the volume value through rotang SKIP le and right.
Alarm ON/OFF: On/Off opon; Press ENTER to confirm. Aer seng, Press INFO/MENU to exit the alarm seng. When the
alarm sounds, the sound is gradually increasing to the set volume. Short press ENTER buon to adjust the snooze countdown
me and acvate the snooze function; Short press STANDBY buon to turn off the alarm when it is ringing.
WARNING: We advise to not use the ALARM in baery mode to avoid that the baery could get empty at the wake up me!
Beer use the ALARM when the device is connected by USB cable to the external power supply.
DAB Funcon
If the PDR-051 enters DAB mode for the first me the radio will automacally search for radio staons available in your local
area. If the radio has already searched for radio staons before, you can press and hold ENTER buon to automacally
search for staons again
Aer the staon search is completed, Rotate SKIP to move up and down the staons in the staon list, Press ENTER to select
the staon Rotate VOLUME to adjust the appropriate volume.
Short press VOLUME to mute/unmute.
Short press the INFO/MENU to view the current radio informaon text in- formaon, signal strength program type, episode
name, channel number/frequency, signal error rate, bitrate, me and date etc.
Saving a DAB staon as Preset
Press and hold the PRESET buon to enter the radio staon preset-store interface. Rotate SKIP to move the preset-store
posion up and down. Rotate "SKIP buon and ENTER to store the radio staon to the current posion. Short press the
PRESET buon to enter the radio staon recall interface and then Rotate SKIP to select a preset-stored radio staon. press
the ENTER buon to confirm and play.
You also use the 0-9 number buons on the remote control to select the preset-stored radio staon for play.
Note: A total of 40 preset radio staons are available.
IMPORTANT INFORMATION REGARDING DAB+ RECEPTION
DAB+ radio recepon is different from FM radio recepon.
• In FM, you can oen sll receive a weak staon, but probably with a rustling or crackling sound.
• DAB + recepon works digitally and if there is not enough signal you hear nothing. No hiss or crackle as with FM. This
is not due to the radio, but to the fact that there is not enough DAB+ signal at that locaon.
• DAB + rule is: no or weak recepon = no sound.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco PDR-051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco PDR-051 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 15.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info