792988

Lenco PDR-046 Manual

8
Zoom out
Zoom in
Previous page
1/68
Next page
8
can select <10 sec>, <20 sec>, <30 sec>, <45 sec>, <60 sec>, <90 sec>,
<120 sec>, <180 sec> and <on>, Press SCAN/OK (12)” button to confirm
the duration time.
● If you do not want to save the settings, press the “MENU/INFO (11)”
button to cancel the settings.
7.5.3. On Level
● Press “ (13)” or “ (14)” button to select the <On level> from the
menu. Press SCAN/OK (12)” button to enter the On level sub-menu.
● Press “ (13)” or “ (14)” button to select the On level from the menu.
You can select <Medium>, <Low>, <High>, Press SCAN/OK (12)” button to
confirm the On level setting.
● If you do not want to save the settings, press the “MENU/INFO (11)”
button to cancel the settings.
7.5.4. DIM Level
● Press “ (13)” or “ (14)” button to select the <On level> from the
menu. Press SCAN/OK (12)” button to enter the On level sub-menu.
● Press “ (13)” or “ (14)” button to select the On level from the menu.
You can select <Medium>, <Low>, <High>, Press SCAN/OK (12)” button to
confirm the On level setting.
● If you do not want to save the settings, press the “MENU/INFO (11)”
button to cancel the settings.
7.6. Language
7.6.1. After entering System settings menu, Press “ (13)” or “ (14)”
button to select <Language> from the menu. Press SCAN/OK (12)”
button to enter the Language settings menu.
7.6.2. Press “ (13)” or “ (14)” button to select the language you want
and Press SCAN/OK (12)” button to confirm the language settings
● If you do not want to save the settings, press the “MENU/INFO (11)”
button to cancel the settings.
7.7. Factory Reset
In some circumstances the device needs to be reset to factory defaults
NOTE: All settings/presets will be lost when doing a factory reset.
7.7.1. After entering the System settings mode, Press “ (13)” or “ (14)”
button to select <Factory Reset> from the menu, Press SCAN/OK
(12)” button to enter sub-menu
7.7.2. Press “ (13)” or “ (14)” button to select <Yes> or <No> and
“MENU/INFO (11)” button to confirm the selection.
● The screen will show “All settings will be restored to factory defacuts! Are
you sure”, after select “Yes”, the device will reset and turn off.
● If you do not want to save the settings, press the “MENU/INFO (11)”
button to cancel the settings.
7.8. Software upgrade
NOTE: Software update can only be done if you have received an approved
update file from our service department. Upgrade with other software files
will make a Permanent damage to this apparatus.
7.9. SW version
7.9.1. After entering the System settings menu, Press “ (13)” or “ (14)”
button <Software version> from the menu. “MENU/INFO (11)”
button to display the Software version information.
7.9.2. Press “MENU/INFO (11)” button to return to previous menu.
8. How do use the DAB Radio
8.1. General functions
8.1.1. Switching On and Off
● Short press the “ (05)” button to power on the Lenco
PDR-045/PDR-046. Then Press “MODE (6)” button to select DAB mode.
Press “SCAN/OK (12)” button to enter sub-menu.
8.1.2. Adjusting the volume
● Press “ (07)” or “ (08)” button to adjust the volume.
The Display will show the volume bar
8.1.3. Speaker mute.
● In DAB radio listening mode, short press the “SCAN/OK (12)” button to
mute the speaker. The Display will show: < Volume Muted > for ~2
seconds, and a mute icon will show on the display.
● Short press the “SCAN/OK (12)” button again to resume the volume or
Press “ (07)” or “ (08)” button to adjust the volume again.
8.2. General Setting
In DAB mode, Press and hold the “MENU/INFO (11)” button to open the DAB
setting menu.
8.2.1. Station list
After the automatic station search, all radio stations will be stored in the
station list. You can store your favored DAB radio stations into presets
memory 1-30.
8.2.2. Full scan
● Press “ (13)” or “ (14)” button to select <Full scan> from the menu.
“SCAN/OK (12)” button to start the full scan.
The display will show: <scanning...> and automatically scans for available
DAB stations.
When the autoscan is finished you can repeatedly Press “ (13)” or “
(14)” button to find your desired radio station and select it by pressing the
“SCAN/OK (12)” button.
Then you can store your favorite station as a preset:
Press and hold the “PRESET(05)” button.
Press “ (13)” or “ (14)” button to select a storage location. You then
can select storage location (P1-P30) and press “SCAN/OK (12)” button to
store the station into the selected preset, “Preset saved” will appear on
screen.
Note: Press and hold preset button 1 – 5 to directly store current radio
station to preset 1 till 5
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco PDR-046 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco PDR-046 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info