534852
7
Zoom out
Zoom in
Previous page
1/40
Next page
PRESET EQ (remote control only)
Press the EQ button on the remote control to select different preset EQ mode, the display will show in sequence
of every press:
SURROUND SOUND (remote control only)
Press the SURROUND button on the remote control to toggle the surround sound mode between on and off. The
display will show “SURR ON” or “SURR OFF. When the surround sound mode is on, the surround sound effect is
activated and the icon “ ” will be displayed.
X-BASS FUNCTION (remote contr ol only)
Press the X-BASS button on the remote control will toggle this function between on and off. The display will show
BASS ONor BASS OFF”. When the X-BASS is on, the bass sound is enhanced and the icon will be
displayed.
MUTE FUNCTION (remote control only)
Press the MUTE button on the remote control to stop the sound from the speakers temporarily, the sound stops
and the display will show “ ”.
To cancel mute, press the MUTE button again or press the VOLUME +/-, disappears in the display and the
sound is restored.
BACKLIGHT CONTROL (remote control only)
During unit on, press the BACKLIGHT button on the remote control will toggle the display backlight between on
and off.
HEADPHONE JACK
The stereo headphone jack is located on the left side of the front panel. Connect a set of stereo headphones (not
included) to this jack for private listening. When headphones are in use, the speakers will be automatically
disconnected.
IMPORTANT: When using headphones always set the volume control to a low level before you put the
headphones on, then put the headphones on and gradually increase the volume to a comfortable listening level.
MEMORY BACKUP
This unit incorporates a battery back up circuit that will keep the clock running in the event of temporary power
interruption.
Insert 2 x 1.5V UM-4, AAA or equivalent batteries into the battery compartment located at the back of the cabinet.
For best results, replace with fresh batteries every 9 to12 months. Do not mix old and new batteries or different
types of batteries such as alkaline and carbon-zinc batteries together.
LCD DISP LAY WINDOW
A. MP3 FOLDER INDICATOR B. FM STEREO INDICATOR
C. TIMER INDICATOR D. SLEEP INDICATOR
E. MUTE INDICATOR F. BAND/TRACK NUMBER/FREQUENCY/TIME INDICATOR
G. EQ INDICATOR
COMPACT D IS C
1. Always use compact discs bearing the mark as shown.
UK-6
A B
C
D
E
F
G
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco MCI-210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco MCI-210 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info