Manual Lenco MCI-210 (page 5 of 40) (English, German, Dutch, French, Spanish)

534852

Zoom out

Zoom in

1/40

Repeat play

During normal playback, you can touch on the REPEAT touch pad to select the repeat play function:

1. To repeat the same track, touch on the REPEAT once, the display will show “REPEAT” (F. 10)

2. If you are playing a MP3 disc, an additional “ ” option will appear. This will repeat the current folder.

3. To repeat the entire disc, touch on the REPEAT again, the display will show “ ”. (F. 11)

4. To cancel repeat play, repeatedly touch on the REPEAT touch pad until “REPEAT” disappears in the display.

Random play (remote control only)

You can press the RANDOM button on the remote control to select the random play function:

1. During CD stop, press the RANDOM button once to select random play, the display will show “RANDOM”,

one track will be randomly selected and started to play.(F. 12)

2. During playback, first press the RANDOM button once, the display will show “RANDOM”, then press the

I◄◄ or ►►I button, one track will be randomly selected and started to play.

3. To resume normal playback, press the RANDOM button again until “RANDOM” disappears.

Intro play (remote control only)

1. Press the INTRO button on the remote control to start intro play. The display will show “INTRO” and will start

playing the first 10 seconds of each track. (F. 13)

2. To resume normal playback, press the INTRO button again, the “INTRO” in the display will disappear.

Program play (remote control only)

You can use the program play feature to play up to 60 tracks on a disc in any desired order. You may also program

a particular track to play several times within a programmed sequence.

1. Load your disc as usual and wait until the display shows the total number of tracks on the disc.

2. Ensue it is in CD stop mode, press the PROGRAM button on the remote control once, the display will show

“MEMORY” and “P-01”. (F. 14)

3. Press the I◄◄ or ►►I button to select the first track number to be programmed. When the desired track

number appears in the display, press the PROGRAM button to confirm and the first track to play is

programmed. The program memory number will advance to “P-02” and ready for the next entry.

4. If a MP3 disc is being loaded, an additional “folder” option will appear before the track selection, press the

PS/FOL/MENU +/- buttons to select the folder.

5. Repeat the above steps to program other tracks, a maximum number of 60 tracks can be programmed.

When you have completed programming, press the ►/ II button to begin program play, playback will be

started on the first track you programmed and will continue until the last programmed track has played. The

display will show “MEMORY”. (F. 15)

6. When the program play is completed, the player stops and “MEMORY” will be displayed. The player

remains in the program play mode. Press the ►/ II button will play the programmed sequence again.

7. To erase the program, in CD stop mode, press the ■ button once; in CD play mode, press the ■ button

twice. “MEMORY” will be disappeared.

Repeat Program play

You may use the program play and the repeat play features together to continuously repeat a programmed

sequence. First use the remote control to program the desired playback sequence, when program play begins,

Touch on the REPEAT touch pad to select repeating the current track or the entire programmed sequence.

LISTENING TO YOUR iPod&iPhone

This unit incorporates an iPod/iPhone docking function, your favourite songs in the iPod/iPhone can be playback

through this unit.

1. To select iPod operation, repeatedly touch on the iPod/CD touch pad until the display shows “No iPod”.

2. Lift down the iPod docking station located on the front right side under the display, install an adaptor which

matches your iPod/iPhone model into the docking tray.

3. Insert your iPod/iPhone into the docking tray, the display will show “iPod” and now you can start your iPod operation.

4. To start or interrupt playback, touch on the ►/II touch pad.(F.16)

5. To skip forward or back to other tracks during playback, touch on the ►►I or I◄◄ touch pad.

6. To select “iPod Menu”, press on the MENU button on the remote.

7. To scroll up or down in the “iPod Menu”, press the PS/FOL/MENU +/- buttons on the remote.

8. To confirm the selection in the “iPod Menu”, press the SELECT button on the remote.

CHARGING UP YOUR iPod&iPhone

You can charge your iPod or iPhone via the docking tray in either standby or under operation, the iPod or iPhone

will be automatically charged when it is docked.

UK-4

F.13

F.14

F.15

F.11F.10 F.12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco MCI-210 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco MCI-210 Manual

Product: