Manual Lenco LS-500 v2 (page 10 of 82) (English, German, Dutch, French, Italian, Spanish)

792676

Zoom out

Zoom in

1/82

- 10 -

Needle: AT-3600L

Frequency Response

20Hz - 20kHz

Channel Balance

<2.5dB

Channel Separation

>18dB

Output Voltage

2.5mV

Recommended Load Resistance

47kΩ

Amplifier connection

MM - input

Recommended Tracking Pressure

3.0±0.5g

Weight

Note:

• Design and specifications are subject to change without notice.

Power supply adaptor:

Manufacturer: Brightpower Optoelectronic Technonlgy Co., Ltd.

Model Number: SW1502400-IM/ S036A1502400M

Input voltage: 100-240V

Input AC frequency: 50/60Hz

Output voltage: DC 15V

Output current: 2.4A

Output Power: 36W

Average active efficiency: 87.58%

Efficiency at low load (10%): 84 %

No load Power consumption: 0.080W

Use only the power supply listed in the user instructions

Turntable Maintenance

1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the turntable mat or a record’s

edge.

2. Clean the stylus frequently with a soft brush with a back-to-front motion only.

3. Clean the records to get rid of dust or grease with a record cleaning brush and record cleaning solution.

4. Clean the turntable lid and turntable cabinet with a slightly damped microfiber cloth.

Note: Do not use cleanser other that contains alcohol,benzene or any other harsh chemicals, with might damage

the paint and finish of the turntable.

Troubleshooting

There is no power

• Power adaptor is not connected correctly.

• No power at the power outlet.

Power is on, but the platter does not turn

• This unit is not in turntable mode. Press the MODE button to turntable mode, the indicator light in red.

• Need to press the PLAY/STOP button once to start playing.

• Turntable’s drive belt is not installed or has slipped off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco LS-500 v2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1.57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco LS-500 v2 Manual

Product: