792676

Lenco LS-500 v2 Manual

9
Zoom out
Zoom in
Previous page
1/82
Next page
- 9 -
Cartridge Replacement
1. Before replacement, put the stylus protector back on the stylus to prevent damage to the stylus during the
replacement process.
2. Carefully remove the wire leads from the original cartridge.
3. Loosen the two screws on the headshell that are securing the cartridge and then remove the original
cartridge.
4. Mount the new cartridge to the headshell and tighten it lightly. Do not completely tighten the screws at this
moment.
5. Connect the wire leads to the new cartridge’s terminals. The wire lead color are as below:
White
Left channel positive
Black
Left channel negative
Red
Right channel positive
Black
Right channel negative
6. Adjust the cartridge’s position to make sure it is precisely aligned on the headshell so that the stylus will be
tracking the grooves in parallel perfectly.
To achieve this, place the included paper cartridge alignment protractor over the turntable spindle, carefully lift
the tone arm and place the tip of the stylus on the points marked 130mm and 250mm respectively. Fine tune the
cartridge’s position on the headshell until the cartridge is perfectly in parallel with the reference lines at both
posits.
7. Tighten the screws completely once the perfect alignment is achieved.
Specifications
Main Unit
Power
AC power adaptor, DC output 15V 2400mA
Power Consumption
36W
Output power
2x 30W RMS
Turntable Speed
33 1/3, 45 RPM
Speed Variance
±1.0%
Wow and Flutter
< 0.15%
Signal to Noise
72dB
Downforce Range
0-6.0g
Effective Tonearm Length
8.6” (218.5mm)
Overhang
0.73”
Turntable Dimensions (W X H X D)
418 X 123 X 346 mm, with lid open 420 X 410 X 420 mm
Weight
5.77kgs
Speaker
Tweeter
8Ω 10W X 2
Woofer
4Ω 30W X 2
Speaker Dimensions (W X H X D)
162 X 248 X 158 mm
Weight
3.76kgs
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco LS-500 v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco LS-500 v2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info