793288

Lenco LPJ-500 Manual

29
Zoom out
Zoom in
Previous page
1/163
Next page
27
TROUBLESHOOTING
First consult the table below before you contact our customer service.
No Image is Projected or a
"No Signal" message is
displayed
1. Power light is on. If it is not on, check the projector
is plugged into the mains, that the socket is
switched on, and then press the power button on the
projector.
2. Check the lens cover has been removed.
3. Check the cables are securely attached and
installed as per the User Manual.
4. The image source may not be set correctly. Press
the Source button on the Control Panel or the
Remote, to select the correct setting.
5. Check in the Menu section under Video input signal
to make sure that has been set correctly.
The Lamp (Bulb) switches
off after a period of time
Is the warning light indicator red? If so, the projector is
overheating which turns the light off automatically.
1. Leave the projector to cool for a few moments.
2. Once cooled, check nothing is blocking the
ventilation vents.
3. Check the air filter is clean and clean if necessary.
4. Turn on the projector.
If the issue persists please contact your support
provider for further assistance.
The Image is wider at the
top/bottom of the screen
This is called keystone and is due to the projection
angle not being perpendicular to the screen. To correct
use the projectors inbuilt keystone function to adjust
the image.
Spots on the screen
Using a vacuum cleaner to clean the lens. If cleaning
doesn’t resolve things, please contact your support
provider for further assistance.
The image brightness has
faded
This could possible be caused by the ambient light in
the room. If not, the chances are that you need to
replace the lamp (bulb).
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco LPJ-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco LPJ-500 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info