694818
9
Zoom out
Zoom in
Previous page
1/44
Next page
9
1. Turn the device on and press the “SOURCE” button to switch to FM radio mode.
2. Press the “SKIP/TUNE / ” buttons to tune the radio manually in 50kHz steps.
3. Press and hold the “SKIP/TUNE / ” buttons to scan for available stations.
Saving and playing a station as a Preset
1. Press the “SKIP/TUNE / buttons to tune the FM radio to the desired station.
2. Press the “CLK SET/MEM” button. Preset number (P01) will appear on the display.
3. Press the “M+/M-” buttons to adjust the desired preset number (P01-P20).
4. Press the “CLK SET/MEM” button to save the current FM radio station to this selected preset.
5. Repeat steps 1 to 4 to program further radio stations.
6. Press the “M+/M-” buttons to cycle through saved radio stations.
BLUETOOTH FUNCTION
Pairing to a device and playing audio
1. Turn the device on and press the “SOURCE” button to switch to BLUETOOTH mode. The
Bluetooth indicator will light up.
2. Press and hold the “PLAY/PAUSE” button to begin pairing. The indicator on the display will begin
flashing quickly.
3. Start the Bluetooth mode on your Bluetooth device and start the scan. Select “Lenco KCR-150” in your
setting to pair it. If your device requests a password enter the default password “0000”.
4. When the devices are successfully paired the indicator on the display will stop flashing and an
audible chime will sound through the speaker.
5. Use the controls on the connected device to select an audio track, to start the playback, pause
etc.
After initial pairing the unit will stay paired unless you manually disconnect the connection or the devices
are out of range.
AUX-IN FUNCTION
You require a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the “LINE IN” input on the right side of the unit and the audio
output on an audio device.
2. Turn the device on and press the “SOURCE” button to switch to LINE IN mode.
3. Use the controls on the connected device to start the playback.
TECHNICAL SPECIFICATIONS
Power supply
: Use only the supplied power adapter
Power input
: 100-240V ~ 50/60Hz
Power output
: 5V 1.2A
Backup Battery
: 2x DC 1.5V UM-3 AA type batteries (not included)
FM range
: 87.5 108MHz
Bluetooth Version
: Version 4.2
Operation Temperature
: -5°C to +55°C
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco KCR-150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco KCR-150 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info