Manual Lenco KCR-150 (page 7 of 44) (English, German, Dutch, French, Spanish)

694818

Zoom out

Zoom in

1/44

5. If the unit is not to be used for an extended period of time remove the batteries.

6. Do not try to recharge the batteries which are not intended to be recharged. They can overhead

and rupture.

Push here

Slide out

CLOCK

Setting the clock

1. When the unit is in Standby press and hold the “CLK SET/MEM” button. The hour on the display

will begin flashing.

2. Press the “SKIP/TUNE / ” buttons to adjust the hour.

3. Press the “CLK SET/MEM” button again to adjust the minutes. The minutes on the display will begin

flashing.

4. Press the “SKIP/TUNE / ” buttons to adjust the minutes.

5. Press the “CLK SET/MEM” button to finish setting the time or wait for the display to stop.

TIMER

Setting the Timer

1. Press the “TIMER” button. At the display the TIMER indicator will flash.

2. Press the “TIMER” button to adjust the timer in increments of 10 minutes.

3. Press the “SKIP/TUNE / ” buttons to adjust the timer in increments of 1 minutes.

4. Wait until the display stop flashing

5. After the set time has expired the device will sound an alarm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco KCR-150 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco KCR-150 Manual

Product: