694810

Lenco KCR-100 Manual

9
Zoom out
Zoom in
Previous page
1/57
Next page
9
INSTALLING THE BATTERIES FOR CLOCK/FM PRESET CHANNEL/TIMER BACKUP
The clock/FM preset channel/timer (if set) will be maintained during a power failure by installing 2 x AAA/LR03 batteries (not
supplied). Once the power is restored, check the clock to make sure it is accurate and set it again if necessary.
INSTALLING THE BATTERIES
1. Open the battery compartment at the bottom of the unit by pressing on the catch and removing the cover.
2. Insert 2 x AAA/LR03 batteries (not supplied), preferably alkaline batteries, into the battery compartment following the polarity as
shown on the diagram inside the compartment.
3. Replace the battery compartment cover.
CONNECTING TO THE POWER SUPPLY
Plug the AC power cable into the AC wall socket.
BASIC OPERATION
Press the STANDBY button to turn on the unit. To turn off, press and hold the STANDBY button again.
Alternatively press the STANDBY button on the remote control to turn on or turn off the unit.
FM/BT
When the unit is turned on, press the SOURCE button to toggle between FM and Bluetooth mode.
Volume Control
Press the VOLUME +/- buttons to change the volume.
Adjusting the Antenna
The antenna wire at the rear panel of the unit should be fully extended to ensure a good FM reception. Alter the antenna position for
the best reception.
FM RADIO OPERATION
Auto Scan
1. Turn on the unit in FM mode.
Press and hold the SCAN button on the unit (or press the SCAN button on the remote control) to start auto-scanning and saving the
available channels (Max. 20 stations can be stored)
Manual Scan
1. Press the or button on the unit (the TUNE /TUNE button on the remote control) repeatedly to tune to a different
frequency.
2. Press and hold the or button on the unit (the TUNE /TUNE button on the remote control) to automatically
search to the next available channel.
Storing FM Presets
You can save up to 20 FM presets.
1. Tune to the station you wish to store.
2. Press and hold the MEMORY button on the unit (or press the MEMORY button on the remote control). Flashing preset channel
number is displayed.
3. Press the or button on the unit (the or button on the remote control) to a preset number that you want to
store. Then press the MEMORY button to save.
… 9 …


Need help? Post your question in this forum.

Forumrules
1

Forum

lenco-kcr-100

Reset search

  • Finns det bruksanvisning på lenco Modell KCR-100 på svenska
    Submitted on 6-8-2020 at 11:07

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco KCR-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco KCR-100 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info