Manual Lenco IPD-3560 (page 6 of 35) (English, German, Dutch, French, Spanish)

534760

Zoom out

Zoom in

1/35

Listening to an External Audio Source

1. Connect an audio cable (not included) with 3.5mm stereo plug from an auxiliary audio

device to the AUX-IN jack of the unit.

2. Press the POWER/STANDBY

button to turn on the unit.

3. To select auxiliary audio input, press the FUNC button. The "AUX" indicator show on

display.

4. Turn on the external auxiliary audio device.

5. The volume and preset equalizer can now be controlled through the unit. Operate all

other functions on the external device as usual.

Notes:Press the POWER/STANDBY button to turn off the unit when you finish

listening.Don't forget to switch off the power of the external audio device as well.

Clock Setting

When the unit is OFF (power off mode):

Set Clock

1. Press the TIME SET button and the clock digits blink.

2. Press the VOL / HR + / - button to set hour.

3. Press the TUN / CH / MIN + / - button to set minute.

Set 12/24 Hour format

4. Press the TIME SET button again entering 12/24 hour format setting mode.

5. Press the TUN / CH / MIN + / - button to select 12 or 24 hour display format.

Exit setting mode

6. To save all settings and auto-exit the setting mode, wait for a few seconds.

iPod/iPhone Docking

If the docking port will not be used for an extended period of time, it is

recommended to

cover the docking port by using the "Dock Cover" insert (included).

1. Use the iPod adaptor included in your iPod and insert it into the docking area

adaptor required if you use iPhone. Your iPod/iPhone can now be inserted

into the

docking port by placing the connector on the bottom of the iPod

iPhone onto the

connector in the docking bay.

Note: - Please be careful when seating the iPod/iPhone into the docking to avoid

damaging the 30-pin connector on the iPod/iPhone or in the docking system.

2. Press the POWER/STANDBY button to turn on the unit.

3. Press FUNC button to select iPod/iPhone mode. The iPod/iPhone will start

playing

automatically and start charging immediately.

4. Press button to pause or resume iPod/iPhone playback.

5. Adjust the sound level by pressing the VOL / HR + / - button.

Note : The volume level cannot be adjusted using the volume control on

your

iPod/iPhone after being docked.

6. The iPod/iPhone charges even during playback.

Note : The iPod/iPhone will charge in all modes.

7. To remove the iPod/iPhone from the unit, press and hold the

button for

three

seconds to switch off the device and then gently remove it from the

docking

connector.

iPod/iPhone playback control:

- Press the

button to pause or resume the iPod/iPhone playback;

- Press the TUN / CH / MIN + or - button to skip to the next or previous song;

- Press and hold the TUN / CH / MIN + or - button for fast-forwarding or

fast-rewinding

during playback.

Treble and Bass Setting

The unit allows you to set your favorite Bass and Treble level.

Bass setting :

1. Press the main unit TONE button once (or press the Bass button from the remote

control) and the "BASS" indicator blinks on display.

2. Press the TUN / CH / MIN +/- button to set the desired bass level.

Treble setting :

3. Press the main unit TONE button again (or press the Treble button from the remote

control) and the "TRE" indicator blinks on display.

4. Press the TUN / CH / MIN +/- button to set the desired treble level.

5. Press the main unit TONE button to exit bass / treble setting mode.

Note : If necessary , you may also press the TONE button from the remote control to

reset the Bass and Treble level to normal (zero).

IPD3560 4lang.indd 10-11 2011-3-18 11:19:36

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco IPD-3560 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco IPD-3560 Manual

Product: