601607

Lenco DR-88 BT Manual

6
Zoom out
Zoom in
Previous page
1/71
Next page
GB 6
Description of Parts
27. Button LIGHT --- Turn the LCD backlight and Power indicator On / Off.
28. Button REP --- In CD mode: Select repeat playback one/all song(s).
29. Button RAN --- In CD mode: Select random playback songs.
30. Button INTRO / HR --- In Standby mode: Set clock hour.
In CD mode: Select INTRO playback.
31. Button SLEEP --- Select the time duration of the sleep timer.
32. Button MIN --- Set clock minute.
33. Button CLOCK --- In Standby mode: Set clock and 12/24 hour format.
34. Battery Compartment --- Located at the rear bottom of the remote control.
Bluetooth Operation
The unit playback mobile device (like, iPad/iPhone/iPod Touch, smart phone and Tablet ) music through Bluetooth
operation. It also incorporated NFC (Near Field Communication) function for easy connection with a mobile device
which also has the NFC function.
Pairing / Connection
(A) NFC Bluetooth pairing / connection
1. Press the STANDBY button to turn on the unit
2. Press the FUNCTION button from the main unit or the BT button from the remote control to select Bluetooth
mode. The LCD will display “ BT Pairing “ .
3. Unlock the mobile device (incorporated NFC function) then place it on top of the NFC sensor area.
4. The mobile device will pair and connect with this model automatically.
Note: The Bluetooth device name of this model: Lenco BT-9000
5. After successful connection, the LCD shows “ BT LINK “.
6. Now you can playback Bluetooth music, see section “Playback Bluetooth music” below.
(B) Manual Bluetooth pairing / connection
1. Press the STANDBY button to turn on the unit.
2. Press the FUNCTION button from the main unit or the BT button from the remote control to select Bluetooth
mode. The LCD will display “ BT Pairing “ and the unit will search nearby Bluetooth device.
3. From the mobile device, turn on its Bluetooth function and it will also search for the nearby Bluetooth device
as well.
4. From the Bluetooth device list of your mobile device, tap on Bluetooth device name “Lenco BT-9000” of this
model for the connection.
5. Once the mobile device is connected with the unit, the LCD shows “ BT LINK “.
6. Now you can playback Bluetooth music, see section “Playback Bluetooth music” below.
Note:
(a) When the unit is turned on from standby mode, in the Bluetooth mode it will automatically search and connect the
device last connected, no need to re-scan and pair.
(b) For connecting other Bluetooth device, in the Bluetooth mode press and hold the BT button from the remote
control. The unit will start to search nearby Bluetooth device and the LCD will show “BT Pairing” again. Implement
steps (B)-3 to (B)-6 above.
Playback Bluetooth music
1. After Bluetooth communication link is set up, run the music player App from the mobile device then playback the
mobile device music.
2. You may adjust both the volume control of your mobile device and the volume control of this unit to nd the most
desirable volume setting.
3. You may press:
(a) the button to Play / Pause Bluetooth music.
(b) the / button to skip tracks backward / forward.
Energy Saving Note
In Bluetooth mode, if the Bluetooth communication link disconnected for around 10 minutes, the unit will go into
standby mode automatically.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco DR-88 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco DR-88 BT in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info