Manual Lenco DIR-260 (page 20 of 261) (English, German, Dutch, French, Italian, Spanish)

792963

Zoom out

Zoom in

1/261

DAB+ radio reception is different from FM radio reception.

• In FM, you can often still receive a weak station, but probably with a rustling or

crackling sound.

• DAB + reception works digitally and if there is not enough signal you hear nothing.

No hiss or crackle as with FM. This is not due to the radio, but to the fact that there

is not enough DAB+ signal at that location.

• DAB + rule is: no or weak reception = no sound.

What can you do if you do not have direct DAB+ reception.

• Always point the antenna straight up vertically first.

• Do not place the radio too close to potential sources of interference such as, battery

chargers, rotating machinery, computers, large metal surfaces, etc.

• Move the radio a few meters.

• Turn on the radio and activate a full scan in the DAB+ menu

• In the display of the radio you will see the progress of the scan and the number of

stations found in the current position of the radio.

Important

• With DAB+ reception, there can be a very big difference in reception level between

one location and "a few meters away". In case of a local weak DAB+ signal, move the

radio to find a stronger signal.

• If you take the radio to another location, perform a full scan again. This will show you

which DAB+ stations can be received there.

FM radio mode

FM radio mode receives analogue radio from the FM band and displays RDS (Radio Data

System) information about the station and show (where broadcast). To enter FM Radio mode,

either press Mode to cycle through the listening modes until FM Radio is displayed, or select

Menu > Main menu > FM. The FM radio mode menu offers the following options:

⚫ Scan Settings

⚫ Audio Settings

⚫ System Settings

⚫ Main Menu

Selecting stations

To find a station, press OK. The frequency display starts to run up as radio scans the FM band.

Alternatively, you can scan up or down by pressing and holding left or right buttons or tune

manually with quick presses.

Note: Scanning can be set to search for strong signals only. Preset stations can be stored and

recalled as described in Presets.

Now playing information

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco DIR-260 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2.89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco DIR-260 Manual

Product: