570768
21
Zoom out
Zoom in
Previous page
1/27
Next page
Leitz Icon Printer User Guide Troubleshooting
21
Connecting to the Wireless Network
If your wireless network does not appear in the list of available networks when running the Wi-Fi Setup Wizard from the
Leitz Icon Control Panel (see Connecting the Printer Using Your Wireless Network on page 8), check for the following:
A Wi-Fi router supports many channels. Although parts of the world support channels 12 and 13, the Leitz Icon printer
supports only channels 1-11. Go to the Wireless settings for your router and verify that your router is not set to use
channel 12 or 13. If it is, change the settings to use a channel between 1 and 11. Note that all other devices on the
network will automatically adapt to this change without needing further setup.
If the initial wireless connection is made, but is then lost, check for the following:
The default setting for some routers is to disconnect devices after a certain period of time.
Go to the setup menu for your router and disable the function for disconnection passive devices or session timeout.
This setting may have a different name, depending on the type of router you are using.
Printing Labels
If you are having trouble printing, check that the print button in the software is green.
If the print button is not green, the software is unable to communicate with the printer; check for the following:
Make sure power is connected to the printer.
Make sure the correct printer is selected in the printer drop-down list.
An old print job may be blocking the print spooler. Check the status of your printer in your Windows or Mac printer
settings.
If the printer is connected using the USB cable, make sure the cable is connected properly. See Connecting the
Printer Using USB on page 7 for more information.
If the printer is connected through your wireless network, look for the printer ID in you list of available networks. If you
see your printer ID, the printer is no longer connected to your wireless network and must be reconnected. In most
cases, the printer will automatically reconnect if you unplug the printer power, and then plug it in again. If cycling the
printer power does not cause the printer to reconnect, then you must reconnect it. See Connecting the Printer Using
Your Wireless Network on page 8 for more information.
If the printer is connected using Access Point (Soft AP) Mode, make sure your computer is connected to the wireless
network indicated by your printer ID. See Connecting the Printer Using Access Point (Soft AP) Mode on page 11 for
more information.
Make sure the printer driver is configured correctly for your printer. See Adding the Printer to Your Computer and
Installing the Printer Driver on page 9 for more information.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leitz Icon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leitz Icon in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leitz Icon

Leitz Icon User Manual - German - 29 pages

Leitz Icon User Manual - Dutch - 28 pages

Leitz Icon User Manual - French, Spanish - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info