570768
19
Zoom out
Zoom in
Previous page
1/27
Next page
Leitz Icon Printer User Guide Caring for the Printer
19
Caring for the Printer
The Leitz Icon printer requires very little maintenance. You may occasionally need to clean the label cartridge
compartment, the exterior of the printer, and the paper path.
If you experience lighter than normal printing or labels are protruding from the label cartridge when the cartridge is
removed from the printer, use the included cleaning card to clean the paper path.
To clean the label cartridge compartment
1.Push the button on the top of the printer to open the cartridge door.
2.Wipe the label cartridge compartment with a clean, dry, lint-free cloth.
To clean the exterior of the printer
Wipe the exterior of the printer with a soft, damp cloth.
To use the cleaning card
1.Push the button on the top of the printer to open the cartridge door.
2.Remove the label cartridge as described in Unloading Labels on page 13.
3.With the label guide latch in the open position, insert the cleaning card into the label feed slot approximately 3 cm
(1.2”).
4.Close the label guide latch.
5.Press and hold until the cleaning card exits through the label exit slot.
6.Flip the cleaning card over and repeat steps 3-5.
Troubleshooting
This section includes information about what to do if you encounter a problem with your printer. If you need further
assistance, please visit the Support section of the Leitz website at www.leitz.com/icon/support.
Printer Errors
In addition to indicating the power and wireless connection status of the printer, the power and wireless status lights can
also indicate printer errors and other information.
For information about the power and wireless connection status, see Status Lights on page 5.
NOTE
Do not use cleaning tissues or chemical substances which might damage the surface
NOTE
Keep the cartridge door open while using the cleaning card.
Error/Status Power Status Light Wireless Status Light
Printer out of paper
or
Label loading failed
Flashing once per second As is; indicates wireless status
Cutter jam Both status lights flash simultaneously twice per second
Invalid or unreadable label cartridge Status lights flash alternately; each light flashes once per second
WPS connection in progress On (Solid) Flashing once per second
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leitz Icon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leitz Icon in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leitz Icon

Leitz Icon User Manual - German - 29 pages

Leitz Icon User Manual - Dutch - 28 pages

Leitz Icon User Manual - French, Spanish - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info