594983
35
Zoom out
Zoom in
Previous page
1/72
Next page
EN
31
Recording mode
PROGRAM SHIFT
Setting the operating mode
Select P with the rear thumbwheel
The program shift function allows the speed/aperture combinations
determined in automatic program mode to be changed, while the overall
exposure, i.e. the brightness of the image, remains unchanged.
The shift is performed with the shutter speed setting dial. Turn
to the right for larger apertures (smaller values) or faster shutter speed
to the left for smaller apertures (larger values) or slower shutter speed.
Displays in viewfinder and top panel display, and in Live View
mode also in the monitor
S in the top panel display as an indication of the use of the Shift func-
tion, and
the operating mode display
P in the monitor changes to S,
the automatically controlled aperture and speed values change in
opposite directions.
Note:
Shift settings are retained
after a photo is taken,
beyond the 12s holding time of the exposure metering system,
but not
when changing to a different exposure operating mode (
A, T, M)
when the camera is switched off and on (also by
Auto Power Saving).
In these cases the camera always returns initially to the standard setting
of shutter speed and aperture when automatic program mode is used
again.
APERTURE PRIORITY - A
Setting the operating mode
1. Select A with the rear thumbwheel (see also p. 30, "Exposure con-
trol")
2. Set the desired aperture by turning the rear thumbwheel.
The exposure time is then automatically set according to the prevail-
ing light and steplessly between 125s and
1
4000s, or
1
1000s when
using the central shutter on some Leica S lenses.
Displays in viewfinder and top panel display, and in Live View
mode also in the monitor
A (Aperture priority) for the selected exposure mode,
the manually set aperture value, and
the automatically controlled time value.
Notes:
If the automatic sensitivity setting (
ISO Auto) is activated at the same
time, the control range of aperture priority is extended. However, the
shutter speed is only extended beyond the value dictated by the
1
f
1
setting selected in the menu when the highest set sensitivity is
reached.
With very little light or extreme brightness it is possible that the avail-
able shutter speed range is no longer sufficient for the preselected
aperture value. In such extremely rare cases a warning symbol for
underexposure appears in the viewfinder (and possibly also a warning
of values below the metering range, see also "Values below the meter-
ing range"), or a warning symbol for overexposure. Correct exposure
metering is then no longer possible.
In video mode the slowest shutter speeds are dependent on the set
frame rate.
SHUTTER SPEED PRIORITY - T
Setting the operating mode
1. Select T with the rear thumbwheel (see also p. 30, "Exposure con-
trol")
2. Set the desired exposure time with the shutter speed setting dial.
The lens aperture is then automatically controlled according to the
prevailing light and steplessly between open and smallest aperture of
the respective lens.
Displays in viewfinder and top panel display, and in Live View
mode also in the monitor
T (Time priority) for the selected exposure mode
the automatically controlled aperture value
the manually set time value
Notes:
If the automatic sensitivity setting (
ISO Auto) is activated at the same
time, the control range of shutter speed priority is extended. A mini-
mum shutter speed that may have been set there, however, is no longer
active.
With very little light or extreme brightness it is possible that the avail-
able aperture range of the lens used is no longer sufficient for the
preselected shutter speed. If possible, select a different shutter speed.
As a rule, however, correct exposure can be achieved with an auto-
matic setting of the appropriate shutter speed even in such cases, by
"overriding" your manual preselection. A warning symbol appears,
possibly also as a warning of values below the metering range, see also
"Values below the metering range". Correct exposure metering is then
no longer possible.
If (=
1
125s) is set with the shutter speed setting dial, the camera switches
to
M (see p. 33). As soon as another shutter speed is set, it switches
back to
T.
Inhalt_EN.indd 31 20.08.2015 14:14:44
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica S 007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica S 007 in the language / languages: English as an attachment in your email.

The manual is 11,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica S 007

Leica S 007 User Manual - German - 72 pages

Leica S 007 User Manual - Dutch - 72 pages

Leica S 007 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info