594983
34
Zoom out
Zoom in
Previous page
1/72
Next page
EN
30
Recording mode
EXPOSURE METERING
EXPOSURE METERING METHODS
The Leica S offers three different exposure metering methods.
Setting the function
1. In the menu under CAMERA, select the item Exp. Metering, and
2. select the desired option in the sub-menu
Spot metering -
Only the middle of the image field is scanned and evaluated for spot
metering. This area is indicated by the circle
1
in the center of the matt
screen. In Live View mode, spot metering is linked to the autofocus
metering, i.e. moving the AF metering point also affects the spot meter-
ing field.
Center weighted metering -
This metering method takes account of the entire image field, although
the parts of the subject in the center have more influence on the expo-
sure than the areas at the margins.
Multi-field metering -
This metering method is based on detection of five metered values. One
is metered in a field in the middle of the image, the other four in the
surrounding fields. The five metered values are used in an algorithm to
calculate an exposure value appropriate to the situation, resulting in
correct reproduction of the assumed main subject.
1
The circle does not exist in all matt screen variants.
EXPOSURE CONTROL
The four exposure modes automatic program (
P), aperture priority (A),
shutter speed priority (
T) and manual exposure control (M) are selected
on the Leica S with the rear thumbwheel:
Setting the operating mode
1. Hold the thumbwheel depressed (≥1s)
In the top panel display, the large letter indicating the set operat-
ing mode replaces the normal display. Triangles to the left and
right indicate the further settings.
2. Turn the thumbwheel (all four operating modes can be reached in
both directions)
The normal display appears again in the top panel display without
further operating steps after a short time (approx. 2s), or immedi-
ately if the shutter button is pressed to the pressure point. The
settings of shutter speed and aperture are made by turning the
rear thumbwheel and/or the shutter speed setting dial. In both
cases half-steps are available.
The settings for the shutter speed (with
T and M) are always made with
the shutter speed setting dial, for the aperture always with the rear
thumbwheel. In both cases half-steps are available.
In the factory setting, turning the rear thumbwheel to the right decreases
the aperture settings, turning to the left increases the settings. This can
be reversed, if desired.
Setting the function
1. In the menu, under SETUP , select the item Customize Controls and
2. select
Rear Wheel Direction in the sub-menu
A further sub-menu appears.
3. In this sub-menu, select the desired direction of rotation
The function of both thumbwheels can be deactivated for complete
protection against inadvertent changing of operating mode, shutter
speed, aperture, etc., i.e. turning and pressing do not then change the
settings in recording mode.
Setting the function
1. In the menu, under
SETUP , select the item Keylock and
2. select
Off or On in the sub-menu
If
On is selected, the corresponding symbol appears in the top
panel display, and in Live View mode also in the monitor
AUTOMATIC PROGRAM MODE - P
Exposure time and lens aperture are automatically set according to the
prevailing light and steplessly between 125s and
1
4000s, or
1
1000s when
using the central shutter on some Leica S lenses, and between open and
smallest aperture of the respective lens.
Displays in viewfinder and top panel display
P for the selected exposure operating mode, and
the automatically controlled shutter speed and aperture values.
Notes:
If the automatic sensitivity setting (
AUTO ISO) is activated at the same
time, the control range of automatic program mode is extended. Even
with fully open aperture, however, the shutter speed is only extended
beyond the value dictated by the 1/f
1
setting selected in the menu
when the highest set sensitivity is reached.
With very little light or extreme brightness it is possible that the avail-
able shutter speed range is no longer sufficient for the preselected
aperture value. In such extremely rare cases a warning symbol for
underexposure appears in the viewfinder (possibly also as a warning of
values below the metering range, see also "Values below the metering
range"), or a warning symbol for overexposure. Correct exposure
metering is then no longer possible.
1
Applies also for
1
f,
1
2f and
1
4f
Inhalt_EN.indd 30 20.08.2015 14:14:44
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica S 007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica S 007 in the language / languages: English as an attachment in your email.

The manual is 11,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica S 007

Leica S 007 User Manual - German - 72 pages

Leica S 007 User Manual - Dutch - 72 pages

Leica S 007 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info