532141
33
Zoom out
Zoom in
Previous page
1/60
Next page
35
DISTO pro
4
/ pro
4
a-1.0.0en
English
en
Basic functions, contd.
Height (4.5)
Using this menu function partial
heights not accessible for the
DISTO can be computed indirectly.
Many of the same application
examples for the Pythagoras
functions are valid here too.
DISTO computes the desired lengths
with three auxiliary measurements
using the Pythagoras function.
PD-Z32
 The second auxiliary measured
point is also the end point of the
desired length.
 The third auxiliary measurement is
to be made at a right angle to the
desired length.
After calling up the menu function the
following is displayed:
The first side if the triangle to be
measured and the corresponding
number "1" are displayed in black.
Press briefly to change into
Pointing mode.
Point at first measuring point with the
laser.
Trigger measurement. Hold
DISTO steady.
Without a stand there is the
possibility of a shaky
measurement. Thus in the Pointing
mode either:
- use the time delay release (x-key)
- or press the trigger key long enough
to start maximum tracking.
Press briefly to confirm
displayed value.
The first measured values appear
beside the corresponding "1".
At the same time the second side of
the triangle to be measured or the
height of the triangle with the
corresponding number "2" is
displayed in black.
Carry out the second auxiliary
measurement as described
previously.
Pressing and holding the trigger key
starts tracking.
The second measured value appears
beside the corresponding number
"2". At the same time the last to be
measured side of the triangle with
the corresponding "3" is displayed in
black.
Align DISTO approximately at a right
angle with the reference (wall).
Where the measured points were
arranged vertically, it would
correspond to the horizontal setting
of the DISTO.
Press briefly to change into
Pointing mode.
Press until minimum tracking
starts.
Move laser dot up and down and
crosswise along the extension of the
desired measuring distance until the
minimum distance can be determined.
height 4.5
1
2
3
height 4.5
1
2
3
11.454m
11.454m
height 4.5
1
2
3
1
2
3
11.454m
08.762m
08.762m
The requirements for the auxiliary
measurements are the same as with
the Pythagoras function, but with the
following exceptions:
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica DISTO PRO 4a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica DISTO PRO 4a in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica DISTO PRO 4a

Leica DISTO PRO 4a User Manual - German - 60 pages

Leica DISTO PRO 4a User Manual - Dutch - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info