532141
31
Zoom out
Zoom in
Previous page
1/60
Next page
33
DISTO pro
4
/ pro
4
a-1.0.0en
English
en
Basic functions, contd.
Pythagoras (4.4)
Using this menu function distances
not accessible for the DISTO can be
computed indirectly.
Examples:
 Height and width of buildings from a
distance.
 Measuring inaccessable parts of a
façade.
 Comfortably measuring while
standing without bending down or
using accessories such as target
plates.
DISTO computes the desired length
by using two or three auxiliary
measurements based on a right-
angled triangle applying the Pytha-
goras function.
Default setting: none
The auxiliary measurements require:
 That the preset measuring directions
(triangle) be adhered to.
The laser measuring points have to
be on one line in a horizontal or
vertical plane. Measurements made
over elevations provide wrong
results.
 The second auxiliary measurement
must be made perpendicular to the
desired length.
 The second laser measuring point
has to fall within the distance of the
desired length or be the end point of
that length.
 Only if measured distances are
short and the DISTO can be placed
firmly against an object should
measurements be done holding the
DISTO by hand. Exact
measurements require the use of a
stand.
For vertical measurement
always use the stand
connection on the adapter end cover
of the DISTO. Only in this way does
the axis of the laser beam run
through the point of rotation of the
stand.
If the DISTO is used with the stand
connection at the bottom of the
casing then the axis of the laser
beam runs about 70 to 100 mm over
the point of rotation. This does not
matter when measuring in the hori-
zontal, but in the vertical this can
lead to considerable height
deviations.
After calling up this menu function
the following is displayed:
The first side of the triangle to be
measured and the corresponding
number "1" are displayed in black.
Press briefly to change into
Pointing mode.
Point at the first measuring point with
the laser.
Trigger measurement. Hold
DISTO steady.
Without a stand there is the
possibility of a shaky
measurement. Thus in the Pointing
mode either:
- use the time delay release (x-key)
- or press the trigger key long enough
to start maximum tracking.
PD-Z27
PD-Z44
pythagoras 4.4
1
2
3
PD-Z38
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica DISTO PRO 4a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica DISTO PRO 4a in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica DISTO PRO 4a

Leica DISTO PRO 4a User Manual - German - 60 pages

Leica DISTO PRO 4a User Manual - Dutch - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info