532132
10
Zoom out
Zoom in
Previous page
1/16
Next page
7
Functions
Leica DISTO™ A8 1.1.0 gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
RC
ROK
PL
H
RUS
CZ
Special functions
If desired, the sides of an Area/Volume can be
composed of several partial lengths. Select the
AREA/VOLUME function.
Press the PLUS - key {A, 3} or MINUS - key {A, 11}
before you start with the first partial measurement.
Proceed with the first partial measurement by pres-
sing DIST - key {A, 1}. In the display an addition or
subtraction symbol appears. Make the first partial
measurement, press PLUS - key {A, 3} or MINUS -
key {A, 11} and make the second partial measure-
ment. Unlimited partial measurements can be
summed up or subtracted. To finish the distance
measurement press the EQUAL - key { A, 5}. The
second distance can be made up of partial distances
with the same method. The result of the Area/Volume
calculation is displayed as usual in the summary row.
Indirect Measuring
The instrument can measure vertical distances with
the tilt sensor. This procedure is especially helpful if
the upper target point does not reflect the laser. The
upper target point can be aimed at, with the digital
viewfinder. For a double tilt measurement, the first
measurement only requires a tilt measurement and
not a distance measurement.
Then the vertical and horizontal distances can be
calculated with the Pythagorean theorem. This
method is ideal when the distance to be measured is
hard to reach.
Both methods only serve to estimate distances
and cannot replace an exact measurement.
Make sure you adhere to the prescribed sequence
of measuring.
All target points must be in a straight line to the
wall area. See figure {N, P}
Best results can be expected if the device is
turned around a fixed point (e.g. positioning
bracket folded out completely and the device is
held towards a wall)
It is highly recommended to use the "Minimum/
maximum measuring" by pressing the DIST -
key {A, 1} longer. The minimum value is used for
the measurements perpendicular towards the
target respectively the maximum value for the
other measurements. This increases the accuracy
of the indirect measuring considerably.
Indirect single tilt measurement - determine
all 3 sides and an angle with 1 distance mea-
surement
See figure {M}
Press the INDIRECT MEASUREMENT - key {A, 12}. In
the symbol, the distance to be measured is high-
lighted. Make the required distance measurement.
The result is displayed in the summary row, the
measured distance and the angle in the secondary
row.
Press the INDIRECT MEASUREMENT - key {A, 12}
for a longer period to obtain more details.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica DISTO A8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica DISTO A8 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica DISTO A8

Leica DISTO A8 User Manual - German - 16 pages

Leica DISTO A8 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info