532132
9
Zoom out
Zoom in
Previous page
1/16
Next page
6
Measuring
Leica DISTO™ A8 1.1.0 gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
RC
ROK
PL
H
RUS
CZ
the REFERENCE - key {A, 8} longer another time to
change back to the "rear" reference.
Measurements from the front edge are signalled by a
different sounding "Beep".
See also "Measuring with tripod".
Measuring
Single distance measuring
Pressing DIST - key {A, 1} turns the laser on. Aim at
the desired target and press DIST - key {A, 1} again.
The measured distance is displayed immediately in
the chosen unit.
Minimum/maximum measuring
This function allows the user to measure the
minimum or maximum distance from a fixed measu-
ring point as well as to determine spacing - see figure
{J}.
It is commonly used to measure diagonal distances
(maximum values) or horizontal distances (minimum
values).
Press and hold DIST - key {A, 1} until you hear a
beep, indicating the device is in a continuous measu-
ring mode. Then slowly sweep the laser back and
forth respectively up and down over the desired
target point - see figure {K, L} - (e.g. a corner in the
room).
Press DIST - key {A, 1} again and the continuous
measurement will be stopped. The values for
maximum and minimum distances are shown in the
display as well as the last measured value in the main
line.
With tilt activated, the tilt value of the maximum
measurement is displayed in the frame.
Functions
Addition/Subtraction
To add or subtract two or more measurements simply
works as follows:
Measurement +/- Measurement +/- Measure-
ment +/- …. = RESULT
Pressing the EQUAL - key {A, 5} ends the sequence
and displays the result in the main line; the actual
measurements are scrolled upwards in the display.
Pushing the CLEAR - key {A, 9} undoes the most
recent operation.
Areas and volumes can be added/subtracted in
exactly the same manner.
Area/Volume
Press the AREA/VOLUME - key {A, 6}. In the symbol
{B, 11, 12} the distance to be measured is high-
lighted. Make the required two or three measure-
ments and the result will be displayed in the summary
row. Press the AREA/VOLUME - key {A, 6} for a
longer period to display additional information
{B, 13-15}. Press the AREA/VOLUME - key {A, 6}
again for a longer period to return to the current
area-/volume measurement or a short press to make
the next area/volume measurement.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica DISTO A8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica DISTO A8 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica DISTO A8

Leica DISTO A8 User Manual - German - 16 pages

Leica DISTO A8 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info