495489
17
Zoom out
Zoom in
Previous page
1/25
Next page
17
System Status Menu
This read-only menu provides information on the active sources
and the latest fi rmware version.
1. When using VGA as signal source, go to Advanced Settings in
OSD menu and select VGA ADC Settings, then choose User ADC
Calibration.
2. A warning message (see image below) will show to make sure
proper image is displayed on screen before ADC calibration begins
I. Image in the green boxes, displayed on both side of the
screen, has to be white and black in order to run the
calibration accurately (the black and white image can
be made using software like Microsoft PowerPoint)
II. The white in the left green box has to be the
brightest white.
III. The black in the right green box has to be the
darkest black.
3. After proper image is displayed, click “Yes” to begin ADC
calibration
4. During calibration process, the following image will show
to notify user to wait for the calibration.
User ADC Calibration... Please Wait!
5. After calibration is completed, the display will notify user if the
process is done successfully by different messages.
User ADC Calibration Finish!
User ADC Calibration Failure!
Item Default Value
Power switch Off
Brightness 50
Backlight 80
Contrast 50
Color Temp. 9300 K
Source Auto Detection Off
OSD Language English
Auto Off
Monitor ID 01
IRFM Off
Baud rate115200
7 Default Setting
Region 1
(White)
Region 2
(Black)
Important Note:
1. The „Region 1“ must be all white.
2. The „Region 2“ must be all black.
Ready to run ADC Calibration?
Yes No
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Legamaster e-Screen FLEX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Legamaster e-Screen FLEX in the language / languages: English as an attachment in your email.

The manual is 8,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info