495489

Legamaster e-Screen FLEX Manual

16
Zoom out
Zoom in
Previous page
1/25
Next page
16
Basic Settings Menu
This menu is used to make initial set-up adjustments to the OSD
(On-Screen Display) menu and other on-screen messages.
OSD Transparent
Set the menu transparency. Press or , select
the desired level, and then press ENTER.
Range: 0~100
Default: 0
OSD Location
Adjust the menu location on the monitor (Up,
Down, Left, Right).
OSD Zoom
Options: On, Off
Default: Off
OSD Rotation
Select the OSD Rotation. Press select
the rotation.
Options: 0, 90, 180, 270
Default: 0 degree
OSD Language
Options: English/German/Dutch/French
Default: English
OSD Timeout
Options: 5~120
Default: 30
Sleep Timer
Set a period of time after which the monitor
will switch to standby mode automatically.
Press to select the desired time limit.
Options: Off, 15, 30, 45, 60, 90, 120 Min
Default: Off
Real Time Clock
Set date, and switch alarm on and off. Use
, , , to adjust these options.
Advanced Settings Menu
Auto Adjustment
Forces the monitor to reacquire and lock to the
input signal. This is useful when the signal quality
is marginal. Note: This feature does not
continually reacquire the signal.
Options: No, Yes; Default: No
Image Position
Image location can be adjusted (Only VGA Mode).
Options: Up, Down, Left, Right
Phase
Range: 0~63 (Only VGA Mode)
Clocks
Range: 0~100 (Only VGA Mode)
Flesh Tone
Options: Off, Low, Medium and High (Only
Video Mode)
Default: Off
Front LED
Options: On and Off; Default: On
IRFM
Creates slight frame motion to help avoid
image retention.
Options: On
Default: Off
Baud Rate
Options: 115200, 38400, 19200, 9600
Default: 115200
Monitor ID
Options: 1~ 255
Default: 0
Light Sensor
Options: On and Off; Default: Off
Factory Reset
Restores all settings to their default.
Options: No, Yes; Default: No
VGA ADC Settings
Select ADC setting, User ADC Calibration, and
restore factory default ADC setting.
Options: Default, User
Default: Default
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Legamaster e-Screen FLEX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Legamaster e-Screen FLEX in the language / languages: English as an attachment in your email.

The manual is 8,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info