Manual Leen Bakker 81021147 Vento 14 (page 29 of 41) (English, German, Dutch, French)

821512

Zoom out

Zoom in

1/41

Speed

Setting fan speed:

Turn clockwise (+) to increase fan speed and

counterclockwise (-) to decrease fan speed. 24

speeds can be set, from 240 rpm to about 1160 per

minute. (each step is 40 revolutions per minute).

The illuminated ring around the speed knob indicates

the set fan speed. With each two steps of the speed

button, a light lights up more or less. Note that the

speed button can be rotated several times. Note the

illuminated ring to see at what speed the fan is

working.

Swing

Automatic oscillating: Swiveling left/right

The "beep" sound on the button operation can be switched off by pressing the

MODE button for 3 seconds on the fan control panel or the SILENT button on the

remote control.

Cleaning and maintenance

Switch the fan off and remove the plug from the socket if you wish to clean the

device or perform maintenance.

The fan only needs general, exterior maintenance. Dust it regularly with a soft cloth

or duster or use a vacuum cleaner with a soft brush to clean. If it is very dirty,

open the grille and clean grilles and blades using a soft, damp cloth and a mild

household cleaning agent. Dry everything thoroughly and allow the fan to dry

properly before reassembling and using again. Ensure that water does not come

into contact with anything other than the grille and blades. Never rinse or spray the

fan!

In order to prevent material discolouration or deformities, never use aggressive or

corrosive (cleaning) products.

If the fan is to be stored at the end of the season, repack in its original packaging:

this offers the best protection. Store it in a safe and dry place that is not subject to

extremes of heat or cold.

Problems and solutions

The fan blades do not rotate even though the device is switched on

 Is the plug in the socket?

 Is there power to the socket?

 Is the blade blocked, e.g. by damage, a deformity on the grille or a foreign

object?

There is strange noise when starting

 Check to ensure the blades are placed as far over the motor axle as possible.

 Check if there are any burrs around the edges of the blades.

 Check whether the blades have become deformed and are touching the

protective grille.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Leen Bakker 81021147 Vento 14 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Leen Bakker 81021147 Vento 14 Manual

Product: