Manual Leen Bakker 81021147 Vento 14 (page 27 of 41) (English, German, Dutch, French)

821512

Zoom out

Zoom in

1/41

Step 1 Remove the packaging material and keep it out of the reach of children.

Step 2 Before continuing, make sure that the plug is not inserted in the socket.

Step 3 Remove (8) the plastic screw gland (foot fastening) from the stand (6)

and place the stand (6) in the plastic base (7), this fits through the

design in only one way. Mount the plastic foot (7) firmly to the stand

(6) using (8) the plastic screw fitting (foot mounting).

Step 4 Turn (2) the plastic screw cap (fan blade fastening) of the fan shaft,

paying attention to rotate clockwise to disassemble this screw cap.

(LOOSEN).

Step 5 Turn (4) the plastic screw gland (protective grid fastening) of the motor

housing, counterclockwise to remove this screw gland

Step 6 Place (5) the rear protective grid against the front of the motor housing.

Make sure that the positioning pins on the motor housing are correctly

positioned in the holes in the protective grid.

Step 7 Now tighten (4) the plastic screw gland (protective grid fastening)

tightly clockwise on the thread of the motor housing.

Step 8 Remove the PVC sleeve from the motor shaft.

Step 9 Place (3) the fan blade on the motor shaft. Important! Make sure that

the pins on the motor shaft are correctly positioned in the recesses in

the fan blade.

Step 10 Tighten (2) the plastic screw cap (fan blade attachment) firmly anti-

clockwise on the motor shaft to secure the fan blade.

Step 11 Check that the fan blade rotates properly.

Step 12 Now place (1) the front protective grille (including the pre-assembled

plastic ring) on (5) rear protective grille. Make sure that the rear

protective grid fits into the recesses of the plastic ring. This is easiest

working from top to bottom.

Step 13 Close the transparent locking flap and secure this flap with the supplied

screw.

Step 14 Insert (9) the supplied adapter with the connecting plug fan side into

the plastic base (7).

Step 15 Place 2 pieces AAA batteries (not included) in the remote control.

Step 16 Set the fan to the desired height (length 84 or 109 cm)

Operation

 Do not start using the fan until:

- All packaging is removed and places away

from children

- All safety instructions have been observed

- The fan is places on a stable flat surface

 Put the fan in the correct position and desired

height.

 Insert the plug into a suitable socket. The red

light on the control panel lights up.

 Press the ON/OFF button. The red light changes

from red to green, the fan starts to run at the

pre-set speed of about 850 rpm. The speed

button lights up.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Leen Bakker 81021147 Vento 14 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Leen Bakker 81021147 Vento 14 Manual

Product: