733408
16
Zoom out
Zoom in
Previous page
1/128
Next page
Translation of the original instructions
EN
16
SAFETY PRECAUTIONS
> WARNINGS
01WARNING: This appliance is for outdoor
use only.
02WARNING: Always disconnect the elec-
tricity and water supplies on completion of
every job.
03WARNING: Do not use the machine if a
supply cord or important parts of the ma-
chine are damaged, e.g. safety devices, high
pressure hoses, trigger gun.
04WARNING: This appliance has been de-
signed for use with the detergent provided
or the detergent specified by the manufac-
turer, such as a neutral shampoo based on
biodegradable anionic surface active deter-
gents. The use of other detergents or chemi-
cals may put the appliance’s safety at risk.
05WARNING: o not use the machine within
range of persons unless they wear protective
clothing.
06WARNING: Do not direct the nozzle to-
ward mechanical parts containing lubricant
grease, as the grease will dissolve and spread
over the surrounding ground. Vehicle tyres/
tyre valves may only be cleaned from a mini-
mum distance of 30 cm, otherwise the vehi-
cle tyre/tyre valve could be damaged by the
high-pressure jet. The first indication of this
is a discoloration of the tyre. Damaged vehi-
cle tyres/tyre valves can be deadly danger-
ous.
07WARNING: High pressure jets
can be dangerous if subject to
misuse. The jet must not be di-
rected at persons,animal, live electrical
equipment or the machine itself.
08WARNING: High pressure hoses, fittings
and couplings are important for the safety
of the machine. Use only hoses, fittings and
couplings recommended by the manufac-
turer. (it is extremely important to protect
these components against damage by avoid-
ing their improper use and protecting them
against bending, knocks and scratches).
09WARNING: Appliances not equipped
with A.S.S. – Automatic Stop System: must
not be left in operation for more than 2 min-
utes with the gun released. The recycled wa-
ter heats up considerably, seriously damag-
INDEX pag.
General information 1
Symbols 1
Safety precautions 1
Usage 3
Care and maintenance 5
Warranty conditions 5
Disposal 5
Troubleshooting 6
Pictures 8-9
GENERAL INFORMATION
> INTENDED USE
· The appliance can be used for washing surfaces out
-
doors, whenever pressurised water is required to re-
move dirt.
· With special optional accessories, it can be used for
foaming and sandingblasting, and for washing with
a rotary brush for application to the gun.
· This appliance’s performance and userfriendliness
make it suitable for NON PROFESSIONAL use.
> THECNICAL DATA
(see thecnical data plate)
SYMBOLS
CAUTION! It is important to be
careful of the following items.
IMPORTANT
LOCKED
OPEN
IF PRESENT
Double insulated (IF PRESENT): supple-
mentary insulation is applied to the basic
insulation to protect against electric shock
in the event of failure of the basic insulation.
warning do not touch
warning symbol : do not inhale
..
- 1
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lavorwash XTR 1007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lavorwash XTR 1007 in the language / languages: All languages as an attachment in your email.

The manual is 7,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info