Manual Lavorwash Parana (page 20 of 128) (English, German, Dutch, French, Italian, Portuguese, Spanish, Finnish, All languages)

733854

Zoom out

Zoom in

1/128

· Any automatic start of the machine without press-

ing the gun trigger is attributable to air bubbles in

the water or other similar phenomena which do not

imply the existence of any defects in the machine.

· Do not leave the appliance unattended during the

standby for more than 5 minutes. Contrarily, for the

safety of the appliance it is necessary to re-turn the

switch into the (0) OFF position.

· Please check that the coupling of the high pressure

hose with the appliance and the gun supplied as

standard equipments made correctly, that is to say

without any water leak.

> SWITCHING OFF

See ﬁg.

turn the switch pos. 2 (0) OFF position and wait that

the water get completly cold.

In this way you avoid any calcareous deposit and

overheatings of the coil and the boiler, which are al-

ways dangerous.

IMPORTANT:

When the machine is switched oﬀ,

always discharge the pressure hose, opening the

gun.

CARE AND MAINTENANCE

See ﬁg.

• XX WARNING: the machine shall be discon-

nected from its power source, by removing

the plug from the socket-outlet, during

cleaning or maintenance

• WARNING: Do not spray the appliance with

water and do not use detergents or aggres-

sive solvents. Machine could be damaged.

Clean the exterior part of the machine with a dry

cloth.

- Always keep the machine clean so that the cooling

air can pass through the slits without obstructions..

- Cleaning the water ﬁlter: To ensure the pump gives

good service it is extremely important to check and

clean the water ﬁlter frequently. Use pliers to extract

it from the pump and rinse it carefully in running wa

ter.

- Cleaning the nozzle: A blockage in the nozzle may

prevent the machine from operating correctly, so it

must be kept clean. Switch oﬀ the machine and re-

move the lance. Clean the nozzle with the pin pro-

vided. Rinse the lance in running water.

- When topping up the oil in the pump, use a SAE

20W40 mineral oil. Quantity supplied: 70 gr.

- The replacement of the fuel metal pipe is requested

after disassembling to avoid fuel leakages.

> STORAGE

See ﬁg.

· Move the machine only by grasping the car-

rying handle

· Store the appliance and the accessories in a

frost-safe room.

WARRANTY CONDITIONS

All our machines are subjected to strict tests

and are covered against manufacturing de-

fects in accordance with applicable regula-

tions. The warranty is eﬀective from the date of

purchase. The following are not included in

the warranty: - Parts subject to normal wear.

- Rubber parts, charcoal, ﬁlters and the acces-

sories and optional accessories. - Accidental

damage, caused by transport, neglect or inad-

equate treatment, incorrect or improper use

and installation failing - The warranty shall not

cover any cleaning operations to which the op-

erative components may be subjected, such

as clogged nozzles and ﬁlter blocked due to

limestones. This pressure cleaner is intended

to be used for domestic and hobby work: the

warranty does not cover any other diﬀerent

kind of use.

DISPOSAL WEEE

As the owner of electrical or electronic

equipment, the law (in accordance with the

EU Directive 2012/19/EU on waste from electrical

and electronic equipment and the national laws of

the EU Member States that have implemented this

Directive) prohibits you from disposing of this prod

uct or its electrical / electronic accessories as munici-

pal solid waste and obliges you to make use of the

appropriate waste collection facilities.The product

can be disposed of by returning it to the distributor

when a new product is purchased. The new product

must be equivalent to that being disposed of. Dis

posing of the product in the environment can cause

great harm to the environment itself and human

health. The symbol in the ﬁgure indicates the ur

ban waste containers and it is strictly prohibited to

dispose of the equipment in these containers. Non-

compliance with the regulations stipulated in the

Directive 2012/19/EU and the decrees implemented

in the various EU Member States is administratively

punishable.

- 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lavorwash Parana in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Finnish, All languages as an attachment in your email.

The manual is 7,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lavorwash Parana Manual

Product: