Manual Lavorwash Parana (page 19 of 128) (English, German, Dutch, French, Italian, Portuguese, Spanish, Finnish, All languages)

733854

Zoom out

Zoom in

1/128

· Vent the unit before operation.

· Unscrew the high-pressure line at the high-pressure

outlet of the unit.

· Switch on the unit and let it run until water free of

bubbles emerges at the high-pressure outlet.

· Switch oﬀ the unit and screw on the high-pressure

hose again.

Failure to comply with the above conditions

causes serious mechanical damage to the

pump and the loss of warranty cover.

> ELECTRICITY SUPPLY

- The appliance’s electrical connection must

comply with the IEC 60364-1 standard.

IMPORTANT:

Before connecting the ap-

pliance, make sure that the nameplate data

are the same as those of the electrical mains

and that the socket is protected by a diﬀer-

ential security breaker with tripping sensitiv-

ity below 0.03 A - 30 ms.

- If the appliance’s plug is not compatible

with the socket, have the socket replaced

with another of suitable type by profession-

ally qualiﬁed staﬀ.

- Never use the appliance in ambient temper-

atures below 0° C if it is equipped with a PVC

(H VV-F) cable.

• XY WARNING: Inadequate extension cords

can be dangerous.

• XJ WARNING: If an extension cord is used,

the plug and socket must be of watertight

construction.

Information for supply may also be obtained

from the plug manufacturer.

<16 A <25 A

<20 m ø 1,5 mm

14 AWG

ø 2,5 mm

12 AWG

20 m - 50 m ø 2,5 mm

12 AWG

ø 4,0 mm

10 AWG

> PLUG

HOW TO CONNECT THE CORD TO A U.K. PLUG:

IMPORTANT The wires in the mains lead are col-

oured in accordance with the following code:

Blue Neutral

Brown Live

Yellow/Green Earth

Please read the instructions given below before con-

necting the cord to a plug. If in doubt please consult

a qualiﬁed electrician.

As the colours of the

wires in the mains

lead of this appliance

may not correspond

with the coloured

markings identifying

the terminals in your

plug, proceed as fol

lows: The wires that is

coloured Brown must

be connected to the

terminal which is

marked with the let

ter L or coloured Red. The wire that is coloured Blue

must be connected to the terminal wich is marked

with the letter N or coloured Black. Safety points for

rewireable or moulded plug: The mains lead of this

appliance may be already fitted with a BS1363 13A

plug.

- If your socket outlet is not suitable for the plug, then

the plug must be removed (cut oﬀ if it is a mould

ed on plug), the ﬂexible cord insulation should be

stripped back as appropriate and a suitable 3 pin

plug ﬁtted.

•

WARNING: Dispose of a plug that has been cut from

the power supply cord, as such a plug is hazardous

if inserted in a live 13A socket outlet elsewhere in

the house. - Should the fuse need to be replaced

an ASTA marked fuse, approved to BS1362, of the

same rating must be used. - Always replace the fuse

cover after ﬁtting a fuse. The plug must NOT be used

if the cover is omitted or lost until a replacement is

obtained. - Make certain that only the correct fuse

cover is used and ﬁtted. - For plugs with detachable

fuse cover the replacement must be the same as the

colour insert in the base of the plug, or as directed by

the embossed wording on the base of the plug. - If

the detachable fuse cover is lost a replacement may

be purchased from a Service Centre.

( if ﬁtted)

NOTE:

(Automatic Stop System),

which stops the machine during the bypass phase.

To start the water cleaner, it is therefore necessary to

set the switch on position (I)“ON”; after that press the

pistol trigger: the Automatic Stop System will start

the machine and will stop it automatically when

the trigger is released. It is advisable to put on the

safety of the pistol trigger whenever the machine is

stopped, in order to avoid unintentional starting.

4 -

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lavorwash Parana in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Finnish, All languages as an attachment in your email.

The manual is 7,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lavorwash Parana Manual

Product: