495524
17
Zoom out
Zoom in
Previous page
1/21
Next page
Installation of the machine - Service Provider Manual
ENGLISH
1. Remove the protective cap of the water inlet.
2. Connect the supply pipe to the machine, screwing
it onto the water inlet located at the rear of the ap-
pliance in the upper right-hand corner (see illustra-
tion).
3. Screw the supply pipe to a cold water tap with a 3/4
gas threaded spout (see illustration).
4. Ensure that the pipe is free of kinks and twists.
The water pressure of the tap should be wi-
thin the limits shown in the Technical spe-
ci cations table. If the length of the supply pipe
is insuf cient, contact a specialised retailer or an
authorised technician.
Never use used or old supply pipes; use only those
supplied with the machine.
10.8 Setting the water hardness
This function allows the hardness of the water used to
be set, enabling the machine to indicate the appropriate
timings for the descaling cycle.
Warning. To set the water hardness, careful-
ly read the contents of Chapter 11.
The hardness of tap water varies from region to re-
gion.
For this reason, the appliance can be set according to
the hardness of the water in the region where it is to be
used, expressed on a scale of 0 to 4.
By default, the appliance is set to a standard value
(hardness 3).
The water hardness setting should be adjusted accor-
ding to the limescale content and hardness of the water,
measured using the strip supplied with the machine.
Brie y immerse the strip (for 1 second) in the water,
and shake gently. After one minute the test results can
be read on the strip.
Sehr weiches Wasser
Weiches Wasser
Mittleres Wasser
Hartes Wasser
HARDNESS 4
HARDNESS 3
HARDNESS 2
HARDNESS 1
HARDNESS 4 (hard)
HARDNESS 3 (medium)
HARDNESS 2 (soft)
HARDNESS 1 (very soft)
HARDNESS 0 (descaling checks disabled)
After performing the test, enter the appropriate value
into the machine.
10.9 Descaling lter (BRITA)
To brew a perfect coffee, water is an essential ingre-
dient, no less important than the correct roast level of
the coffee. It should always be clear and fresh.
Thanks to its revolutionary technology, the descaling l-
ter puri es tap water, eliminating all harmful substances
without removing important minerals.
The descaling lter should be replaced whe-
never indicated by the machine.
Before descaling, the descaling lter should
be removed from the water tank.
For correct installation of the descaling lter, please
follow the indications on the packaging of the lter.
The lter should then be washed.
Access the service menu as described in section 11.1
and view the lter washing menu.
2.6
Filter cleaning
Using the appropriate controls, select “Yes” to wash
the lter.
2.6
Filter cleaning
Yes
^
Note: the wash cycle cannot and should not
be interrupted.
The display shows:
Filter cleaning
Empty
cof.groun.drawer
Empty the coffee grounds drawer of any liquids. When
removing the drawer, the display shows:
Filter cleaning
in progress
Insert
cof.groun.drawer
WARNING: reinsert the coffee grounds dra-
wer only after emptying it of any liquids.
When the coffee grounds drawer is inserted, the machi-
ne will start dispensing water into the drawer in order to
wash the lter. The display shows:
Filter cleaning
in progress
Wait please…
The machine dispenses a preset amount of water
for appropriate washing of the new descaling filter.
When the machine has finished washing the filter,
the display shows:
Filter cleaning
Empty
cof.groun.drawer
Empty the coffee grounds drawer of any liquids. When
removing the drawer, the display shows:
Filter cleaning
in progress
Insert
cof.groun.drawer
When the coffee grounds drawer is inserted, the ma-
chine will starts up automatically. When warm-up and
rinse cycle are complete, the display shows:
Lavazza
Ready
Insert capsule
The machine is now ready to be used.
Note: the machine should be set to the wa-
ter hardness level immediately below the
result of the test; if three squares change colour,
set the machine to water hardness 2.
17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lavazza LB2300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lavazza LB2300 in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info