646110

Laserliner SoundTest-Master Manual

11
Zoom out
Zoom in
Previous page
1/32
Next page
GB
SoundTest-Master
11
7
MAX function
The MAX function is activated by pressing the "MAX" button. The measured value currently displayed
corresponds to the largest measured value. Lower measured values are not displayed. Press the "MAX"
button again to deactivate the function.
8
Record measured values (RECORD)
An internal memory makes it possible to record measured
data during a measurement session. The stored data can be
read out for subsequent evaluation. The memory can hold
up to 16,000 measurements. Press the "RECORD" button
for 2 seconds to start recording. "RECORD" appears at the
bottom of the display. Press the button again for 2 seconds to
stop recording. "FULL" is shown on the display as soon as the
memory in the device is full.
2 sec
9
Clear memory
Press and hold the "LEVEL " button for 3 seconds to completely delete the data
in the memory. "CLR" appears on the display. Press and hold the "LEVEL " button
for 3 seconds to conÖ rm that you wish to delete the data. The "CLR" display then
× ashes for a short time. The delete operation is concluded as soon as the normal
display view appears again.
Do not start measurement recording before the device has been securely set up and adjusted.
Measurements may be falsiÖ ed if settings are changed during recording.
!
10
Transfer stored data (SEND MEMORY)
The software on the supplied CD must be installed on your PC before the stored data can be read out and
evaluated. Place the CD in the drive of your PC, start the installation program and follow the installation
routine.
3 sec
After successful installation, start the application. Then
connect the supplied transfer cable to the PC interface on the
device. Connect the other end of the cable to a free port on
your PC. Press and hold the "SEND MRMORY" button for 3
seconds to transfer the data. "SENDING MEMO" appears on
the display and goes out again as soon as data transfer has
been completed.
Refer to the PDF Ö le on the CD for information on installation
and operation of the supplied software.
!
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner SoundTest-Master at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner SoundTest-Master in the language / languages: English, German, Dutch, French, Finnish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info