646792
33
Zoom out
Zoom in
Previous page
1/116
Next page
33
Revolution / Revolution Green
Adjustment mode
1. Take the alignment of the rotary laser into account when performing adjustment
work. Always adjust all the axes.
2. Switch the device to adjustment mode:
Switch off the Revolution and then switch it on again (press the ON/OFF but-
ton briefly), whilst holding down the slope/man button. Keep the slope/man
button pressed down until the X, Y and Z axis LEDs light up simultaneously.
Then you can release the slope/man button.
Use the X/Y button on the Commander 50 to toggle between the X and Y
axes.
Alternatively, you can toggle between the X and Y axes using the positioning
button (rotate to the right on Commander 50 or SensoCommander).
In vertical operation, the device activates the Z axis automatically.
3. Correcting the adjustment:
With the plus/minus buttons on the adjustment panel of the Commander 50,
you can move the laser away from its current position at the level of refe-
rence point A2.
NOTE: In spot mode, the laser can only be rotated to the required position by
means of the positioning buttons on the device.
4. Completing the adjustment:
Cancel: Switch the Revolution off (via the ON/OFF button) to reject all the
adjustment settings and restore the previous status.
Save: The new adjustment settings are saved by pressing the enter button on
the Commander 50.
Alternatively, you can save the new adjustment settings using the positioning
button (rotate to the left on Commander 50 or SensoCommander).
L
Note: Regularly check the adjustment before
use, after transport and after extended
periods of storage. Always make sure
to control all axes.
(13)
(1)
(1)
(20) (20)
(18)
(23)
(21)
(24)
(5)
(16)
X- / Y- /
Z-Axis
X
Z
Y
Adjustment panel
GB
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner Revolution at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner Revolution in the language / languages: English, German, Dutch, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info