Manual Laserliner Revolution (page 31 of 116) (English, German, Dutch, French, Swedish, Norwegian, Finnish)

646792

Zoom out

Zoom in

1/116

Rotary mode

The following speeds can be set using the rotary button:

750, 350, 0 rpm

Spot mode

You access spot mode by pressing the rotary button

repeatedly until the laser stops rotating. The laser can

then be positioned exactly at the measuring point by

means of the direction buttons.

Scan mode

The scan button can be used to activate and set a light-

intensive segment in 4 different widths. You position the

segment via the direction buttons.

Revolution Green

The distance at which a laser is visible to the naked eye depends on its colour i.e.

wavelength. This is because of the human eye's physiology – green appears brighter to

us than red. Depending on ambient light, green lasers are therefore many times more

visible than red lasers; in indoor areas this is as much as 12 times brighter. This permits

applications on dark surfaces, over longer distances and work in very bright ambient

light. A red laser with a 635 nm wavelength is used as a reference value for brightness

differentiation.

In contrast to red lasers, green laser light can only be produced indirectly. This is a source

of potential characteristic fluctuations:

• The optimal operating temperature is 20°C. Outside of the operating temperature

range of 0 ... 45°C green lasers become darker. IMPORTANT: Allow the unit enough

time to adapt to the ambient temperature before switching the unit on.

• Laser brightness may vary somewhat from one unit to another. This is a natural pheno-

mena and excluded from warranty claims.

• Green Laser will only work with certain Receivers. The maximum range of the Receiver

is shorter, please refer to technical details.

Revolution / Revolution Green

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner Revolution in the language / languages: English, German, Dutch, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Laserliner Revolution Manual

Product: