646792
26
Zoom out
Zoom in
Previous page
1/116
Next page
26
GB
L
Note:
Do not expose batteries to excessive heat such as sunshine, fire, etc. Only recharge-
able batteries must be charged. Used batteries must not be disposed of as household
waste. Please take them to a collection point for used batteries or for special waste.
Ask your local authority for further details. Batteries with the recycling symbol can also
be returned to our dealerships or to our Technical Service.
Battery (NiMH) charging
Charge rechargeable batteries fully before using the
device.
Connect the charger to the mains power supply and
the charging socket (G) on the high-performance
rechargeable battery (H). Please only use the charger
supplied; using a different charger will invalidate
the warranty. The rechargeable battery can also be
charged when it is not inserted in the device.
When the rechargeable battery is being charged,
the LED on the charger lights up red. When the LED
changes to green, charging is complete.
Alkaline batteries (4 x type C) can be used as an alternative. Insert them in the battery
compartment (I) as per the installation symbols.
Insert the high-performance rechargeable battery (H) or the battery compartment (I)
into the slot (L) and tighten with the fastening screw (F)
With the rechargeable battery inserted, the device is ready to run even during
charging.
If the operation/battery indicator flashes continuously, the batteries need to be
replaced or the rechargeable battery re-charged.
Inserting batteries into the SensoLite laser receiver
Open the battery compartment (33) and insert the battery as per the installation sym-
bols, observing the correct polarity. Close the cover again.
In order to preserve the battery life, the receiver switches off automatically if it is not
used for around 5 minutes.
Inserting batteries into the Commander 50
To insert the battery, open the cover fully (see figure).
Correct polarity must be observed. Close the cover
again fully.
G
F
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner Revolution at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner Revolution in the language / languages: English, German, Dutch, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info