646105

Laserliner MultiWet-Master Manual

18
Zoom out
Zoom in
Previous page
1/268
Next page
9
10
Resistance measurement / material moisture measurement
Be sure neither supply lines (electric lines, water pipes, etc) nor a metal subsurface is present at the location to
be measured. Insert the electrodes as far into the material as possible but never use excessive or sudden impact
force as this could damage the device. Always pull the device out of the material with left/right twisting motion.
Perform several comparative measurements at different locations to minimise measurement error. The
sharply pointed electrodes present an injury hazard. Always put the safety cap on the device when it is not in
use or being transported.
The location to be measured should be untreated, free of knots,
dirt and resin. Measurements should not be made on the end
faces of wood because these areas dry particularly quickly such
that they produce incorrect measurement results. Perform
multiple comparative measurements. Wait until the %
symbol stops blinking and remains constantly lighted. Only
then are measurement values stable.
Be aware that walls (or surfaces) with differing material
structures, or even variations in material composition, can
cause measurement results to be falsiÖ ed. Perform multiple
comparative measurements. Wait until the % symbol
stops blinking and remains constantly lighted. Only then
are measurement values stable.
Capacitive measurement / material selection
Two different wood groups and material-
independent index mode can be selected
in capacitive measuring mode. Measurements
carried out in index mode are not material-
related, i.e. for materials, for which no
characteristics are stored in the device. Select
the required material by pressing the „SET“
button. The wood groups that can be selected
are listed under 11 in the following table.
Mineral building materials
Wood
Types of wood:
[S] softwood, [H] hardwood
Index
18
GB
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner MultiWet-Master at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner MultiWet-Master in the language / languages: All languages as an attachment in your email.

The manual is 12,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info