Manual Laserliner MultiTest-Master (page 10 of 136) (All languages)

646776

Zoom out

Zoom in

1/136

A photoelectric sensor is used to measure the incident light intensity.

This is the power of the radiated light per unit of area. Photometry

deÖ nes light in terms of how it is perceived by the human eye. The

sensitivity of the eye also depends on the wavelength or light colour.

The measuring unit uses special colour Ö lters on the sensor that

adapt to the sensitivity curve (CIE curve).

After switching on the device, press the „Lux“ button.

Please observe the following application notices when

determining illuminance:

– Align the sensor on the measuring surface so it is perpendicular to

the light source

– During measurement, the incidence of light must not be affected

by shadows from the operator or other objects not involved in the

measurement

– Remove the wind de× ector from the microphone

– You can check the measuring device‘s zero position by covering the

sensor completely.

– Discharge, × uorescent or energy-saving lamps should be switched

on well in advance of the measurement process (approximately 15

minutes) so that the brightness has time to stabilise

By pressing the „Mode“ button, you can get the device to display the

highest (MAX), lowest (MIN), average (AVG) or difference value (DIF)

in addition to the current measured value. As its name suggests, the

„HOLD“ button enables you to hold the current measured value.

Illuminance (lux)

SET

HOLD

MODEMODE

TEMP/%RH

UNIT

ANEMO

LUX

The device measures radiation in the main direction, perpendicular to the sensor plane. Incident

light rays at an angle are taken into account by the sensor using an adjustment curve.

Reference values for illuminance in indoor spaces

Practical example Luminous intensity in lux

TrafÖ c areas, ancillary rooms 20

Corridors in buildings used by people 50

Sanitary facilities, machine rooms, staircases 100

Regularly occupied work stations within production facilities, canteens 200

Conference rooms, gyms 300

OfÖ ces, medical facilities (emergency unit) 500

Design and drawing rooms 750

Monitoring locations, assembly rooms, test stations 1000

Assembly rooms for small components 1500

The amount of light available in outdoor spaces is approximately 100

times greater than in indoor spaces. In the event of a high incidence

of light, the measured value on the display is reduced by a factor of

10 or a factor of 100.

SET

HOLD

MODEMODE

TEMP/%RH

UNIT

ANEMO

LUX

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner MultiTest-Master in the language / languages: All languages as an attachment in your email.

The manual is 7,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Laserliner MultiTest-Master Manual

Product: