646737
18
Zoom out
Zoom in
Previous page
1/88
Next page
DualAxis-Laser
18
Short instructions
Switching the
unit on for the
first time
Switch the unit on using the ON/OFF button (34). The
laser rotates at a speed of 600 rpm and the automatic
sensors are active.
Remote control The remote control can be used to control all functions
except slope entry. Standby mode is a special feature:
press the standby button (36) to switch the DualAxis-
Laser to standby mode. All settings are retained.
Rotating speed Press the rotation button (35) to switch speeds (0; 300;
600; 1100 rpm).
Digital slope
function
Press the X button (27): The first digit starts to flash.
Press the plus/minus buttons (28) to enter a positive
(„0“) or negative value („-“). Press the X button to
select the values of subsequent digits. Numerical values
can be set using the plus/minus buttons (28). The Y but-
ton functions in the same way as the X button.
Important: You must confirm your entries by pressing
Enter (29); the rotary laser will then set the required
value. Value entry is disabled during levelling („SLOPE“
flashes on the LCD (19)). Once levelling is complete and
value entry has been reactivated, „SLOPE“ will stop flas-
hing and will be displayed permanently on the LCD.
Manual slope
function
This function is used to deactivate sensor automation.
Significant deviations from the horizontal and vertical
planes can now be configured. To do this, press the
auto/man button (32). „MAN“ will appear on the LCD
(24). Note: The DualAxis-Laser is not capable of motori-
zed slope traversal in auto/man mode. Important: Since
the automatic sensors are not active, horizontal levelling
is not possible.
ENGLISH
(34)
(35)
(29)
(27) (31)
(28) (28)
(32)
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner DualAxis-Laser at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner DualAxis-Laser in the language / languages: English, German, Dutch, Danish, French, Finnish as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info