646737

Laserliner DualAxis-Laser Manual

17
Zoom out
Zoom in
Previous page
1/88
Next page
DualAxis-Laser
17
A Dual Grade Laser of extremely rugged design – for civil and
construction engineering
High-precision Slope Rotary Laser, 5° horizontal self-levelling range, precision
0,5 mm / 10 m. Deviation from the horizontal plane can set digitally in X and Y axes.
Electronic vials and positioning motors controlled by temperature-stable sensors for
automatic horizontal alignment. Highest reliability is guaranteed through the ant-drift
system (ADS): The electronics permanently monitor the measuring process and switch
the laser off in the case of any outside interference or disturbance. The laser beam can
be switched off in sections. Laser modes: rotary and hand receiver mode. High maximum
speed of 1100 rpm, the telescopic sight supplied with the device makes alignment easy,
large illuminated LCD.
General safety instructions
Caution: Do not look directly into the beam. Lasers must be kept out of reach of child-
ren. Never intentionally aim the device at people.
This is a quality laser measuring device and is 100%
factory adjusted within the stated tolerance. For
reasons of product liability, we must also draw your
attention to the following: Regularly check the calibration before use, after transport
and after extended periods of storage. We also wish to point out that absolute calibra-
tion is only possible in a specialist workshop. Calibration by yourself is only approximate
and the accuracy of the calibration will depend on the care with which you proceed.
ENGLISH
i
Note:
This product is a precision instrument that must be handled and treated with care.
Avoid shocks and impact. Always keep and carry in the case! Switch laser off. For
cleaning, use a soft cloth and glass cleaner.
Warranty
The warranty period is 2 years from the date of purchase. The warranty covers all
material or manufacturing defects occurring during this time. The following are exclu-
ded from warranty: Damage due to improper use (e.g. operation with wrong type of
current/voltage, connection to unsuitable power source, fall onto hard surface, etc.) or
improper storage, normal wear and tear, and defects which only insignificantly impair
the value or suitability for use. Any tampering by unauthorised persons will render this
warranty void. In the event that you need to claim warranty, please take the complete
device together with all information and the invoice to one of our dealers or send it in to
Umarex-Laserliner.
LASER RADIATION
DO NOT STARE INTO THE
BEAM! CLASS 2 LASER
< 1 mW · 635 nm
EN 60825-1:2007-10
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner DualAxis-Laser at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner DualAxis-Laser in the language / languages: English, German, Dutch, Danish, French, Finnish as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info