646722
16
Zoom out
Zoom in
Previous page
1/84
Next page
16
2x
MODE
1 sec
1x
MODE
2x
MODE
+
+
12
13
14
13b
The wet/dry indicator can be programmed to the already predeÖ ned values especially for index mode. This
produces a new setting for the „wet“ and „dry“ threshold value (see arrows).
Programmable wet/dry indicator in index mode
Index mode is used to rapidly locate moisture with comparative mea-
surements, without a direct output of material moisture in %. The out-
put value (0 through 1000) is an indexed value that increases as mate-
rial moisture becomes greater. Measurements made in index mode are
independent of material type and particularly useful with materials for
which no characteristics are stored. When comparative measurements
reveal strongly deviating values, the course of moisture in the material
can be localized quickly.
In addition to those materials with characteristics stored in the measuring
device, index mode makes it possible to measure other building materials
(05 ... 19), refer to the table at the right. The displayed value (0 through
1000) serves as the basis. Activate index mode in your measuring device
(Step 13b). In order to determine the degree of moisture in a type of
building material, Ö rst Ö nd the material number for the building material
to be measured. Following this, read the measured value from the scale
displayed on the measuring device for index mode. Now determine the
value for the corresponding material number in the table. If this value has
a dark grey background, the material is to be classiÖ ed as „wet“, values
without coloured background are considered to be „dry“.
Index mode
In addition to the measured value, a moisture evaluation will be displayed
by the wet/dry indicator in the display. This indicator is tuned by the mate-
rial characteristics (A, B, C; 01, 02, 03, 04) stored in the measuring device.
This evaluation is subdivided into 5 steps and it makes an evaluation of
the measured material easier. The display is to be considered as a
general indication and not a Ƃ nal evaluation.
Wet/dry indicator
GB
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner DampMaster Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner DampMaster Plus in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info