646722

Laserliner DampMaster Plus Manual

14
Zoom out
Zoom in
Previous page
1/84
Next page
14
6
MODE
8
7
8
DE
Be aware that walls (or surfaces) with differing material
structures, or even variations in material composition,
can cause measurement results to be falsiÖ ed. Perform
multiple comparative measurements. Wait until
the % symbol stops blinking and remains constantly
lighted. Only then are measurement values stable.
The location to be measured should be untreated,
free of knots, dirt and resin. Measurements should
not be made on the end faces of wood because
these areas dry particularly quickly such that they
produce incorrect measurement results. Perform
multiple comparative measurements. Wait until
the % symbol stops blinking and remains constantly
lighted. Only then are measurement values stable.
Mineral building materialsWood
Be sure neither supply lines (electric lines, water pipes, etc) nor a metal subsurface is present at the location to
be measured. Insert the electrodes as far into the material as possible but never use excessive or sudden impact
force as this could damage the device. Always pull the device out of the material with left/right twisting motion.
Perform several comparative measurements at different locations to minimise measurement error. The
sharply pointed electrodes present an injury hazard. Always put the safety cap on the device when it is not in
use or being transported.
Measuring material moisture
Just which building materials are grouped under 01 to 04 can be found in the table in Section 11.
Select building material (01, 02, 03, 04)
GB
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner DampMaster Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner DampMaster Plus in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info