646117

Laserliner CombiFinder Plus Manual

7
Zoom out
Zoom in
Previous page
1/92
Next page
CombiFinder Plus
07
5
6
B
A
C
GB
Briefly press the Mode button (4).
METAL-SCAN: Detecting metal in all non-metallic materials
AC-SCAN: Locating live lines directly under non-metallic cladding
Select measurement mode
The device and the wall must maintain contact during calibration (except
for calibration in mid-air) and throughout the entire measurement process.
A hand should remain at the device the entire time as well.
!
The tool is able to detect hidden metal in all non-metallic materials,
e.g. brick, concrete, screed, wood, plaster fibreboard, gas concrete,
ceramic and mineral building materials.
– Select METAL-SCAN (button 4).
– As soon as the display switches from CAL
to CAL OK, you can move the device.
– MOVE: Move the tool slowly across the surface.
Measuring in METAL-SCAN mode
Tip 1: The position between the two markings is the mid-point of the metal object.
Through the high measuring sensitivity, thick metal objects appear broader than they are
in real life. Therefore move the device over the newly found object as shown in Image B.
The device is calibrated automatically during this process. Manual calibration should be
performed near the place found last as shown in Image C. Repeat this step as needed.
Manual calibration
Pressing the CAL button (5) manually calibrates the device. This
allows measurements to be restarted and objects to be isolated
more precisely.
Maximum sensitivity is achieved when the device is held in the
air while calibrating.
Isolate an object to be
measured by passing
over it several times.
Manual
calibration
Manual_CombiFinder-Plus_Rev.1212.indd 07 08.01.13 11:33
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner CombiFinder Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner CombiFinder Plus in the language / languages: All languages as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info