646162
18
Zoom out
Zoom in
Previous page
1/92
Next page
BeamControl-Master BCM
18
Calibration procedure
6. Once you have completed steps 1 to 4 and identified dots A2 (reference) and A3
(deviation), use the corresponding screws to level the laser so that dot A3 covers dot
A2. During this process, the air bubble in the level will move out of its central positi-
on and stray to the side.
7. Remove the protective caps from the ends of the levels to
expose the calibration screws. Turn the screws to calibrate the
level (using the SW 2.5 socket wrench included in the scope of
supply). Calibration is complete when the air bubble returns to
the centre of the level.
8. Repeat for the remaining axes.
Calibration screws
Technical data (Subject to technical alterations)
Accuracy ± 2 mm / 10 m
Laser
class 2
Output power < 1 mW
Laser wavelength
635 nm
Beam splitter 20”
Reference beam
vertical
Horizontal plano inclination can be adjusted manually
Speed of rotation 0 ... 120 rpm variable,
550 rpm for receiver
Battery life 40 h (4 x 1,5 V of type AA Mignon alkaline)
Continious operation connection socket for external supply
Working- / Storage temperature
0° C to 50° C / -10° C to 70° C
Weight 0,8 kg
SensoCommander 120 / 310 (optional)
Batteries/Power supply:
SensoCommander 120 /
SensoCommander 310
2 x type AAA /
1 x 9 V block
Battery life approx. 70 h
Laser reception range
SensoCommander 120
SensoCommander 310
max. 120 m
max. 300 m
Working temperature -10°C ... + 50°C
Storage temperature -10°C ... + 70°C
ENGLISH
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner BeamControl-Master BCM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner BeamControl-Master BCM in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info