577462

Laserliner AC-Tracer Manual

9
Zoom out
Zoom in
Previous page
1/136
Next page
9
AC-Tracer
!
Overvoltage category III: Equipment in Ö xed installations and for applications
where speciÖ c requirements with regard to the reliability and availability of
equipment have to be met, e.g. circuit-breakers in Ö xed installations and
devices used in industrial applications which are permanently connected to the
Ö xed installation.
Important notes. Must be observed.
Protection class II: The test device has reinforced or double insulation.
Danger area warning
Hazardous electrical voltage warning: Unprotected live components inside the
device housing may pose a risk of electric shock.
Symbols
– If you are taking measurements in the hazardous vicinity of electrical installations, do
not work alone and seek guidance from an electrically skilled person before starting
work.
– Before taking any measurements, make sure that both the area to be tested (e.g. a line),
the test device and the accessories used (e.g. connection cable) are in proper working
order. Test the device by connecting it to known voltage sources (e.g. a 230 V socket in
the case of AC testing). Stop using the device if one or a number of its functions fails.
– Do not leave the sender running permanently. Only use during actual measurement.
After a measurement is taken, the transmitter (including test leads) must be removed
from the measured circuit.
– Do not expose the device to moisture or liquids. When using the device outdoors, make
sure that the weather conditions are appropriate and/or that suitable protection mea-
sures are taken. The measuring tools and accessories are not toys. Keep out of reach of
children.
– Do not use the device in environments containing explosive gases or vapour.
– Protect the device against contamination and damage, and make sure it is stored in a
dry location.
– The structure of the device must not be modiÖ ed in any way.
– Please ensure compliance with the safety regulations set out by local and national
authorities with regard to the correct and proper use of the device.
GB
Manual_AC-Tracer_Rev.0910_print.indd 9 05.10.2010 14:37:37 Uhr
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner AC-Tracer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner AC-Tracer in the language / languages: All languages as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info