577462
8
Zoom out
Zoom in
Previous page
1/136
Next page
8
The device must only be used in accordance with its intended purpose and within the scope
of the speciÖ cations.
– Use only original test adapters.
Only the original measuring leads may be used. Their voltage, category and ampere
rated powers must match those of the measuring device.
Isolate the device from all current sources before opening the battery compartment cover.
– If possible, do not work alone.
If you have to take hold of the measuring spikes, do so by the grip sections only. Do not
touch the measuring contacts whilst the measurement is being taken.
Only connect the completely prepared device (transmitter with test leads plugged in) to a
power source. First disconnect the electrical circuit from the power supply and only switch
on again after wiring work has been completed. Lock the master switch to prevent it being
inadvertently switched on.
If the device comes into contact with moisture or other conductive residue, work must
not be carried out under voltage. At and above voltages of 25 V AC/60 V DC, the presence
of moisture creates the risk of life-threatening electric shocks. Clean and dry the device
before use. When using the device outdoors, make sure that the weather conditions are
appropriate and/or that suitable protection measures are taken.
If you are working with voltages higher than 25 V AC/60 V DC, exercise extreme caution.
Touching the electrical conductors at such voltages poses a risk of life-threatening electric
shocks.
Do not use the device in environments in which there are con-ductive particles or where
the occurrence of moisture (in the form of condensation, for example) can create transient
conductivity.
Safety instructions
Cable tracer set with transmitter and receiver
– Fast tracing of coherent electrical circuits.
– Location of lines in coherent, live electrical circuits.
– Detection of fuse circuits in live installations.
– Transmitter power supply directly from power cable to be tested = measurement under
operating conditions.
– Socket adapter for direct and fast testing in building installations.
– E27 lamp adapter for direct and fast testing in lamp circuits.
Function / Application
Read the operating instructions and the enclosed brochure „Guarantee and addi-
tional notices“ completely. Follow the instructions they contain. Safely keep these
documents for future reference.
!
GB
Manual_AC-Tracer_Rev.0910_print.indd 8 05.10.2010 14:37:36 Uhr
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner AC-Tracer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner AC-Tracer in the language / languages: All languages as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info