685307

Landmann 12660 - Miton 4.1 Manual

9
Zoom out
Zoom in
Previous page
1/28
Next page
9
Miton PTS 4.1
Disconnecting the gas cylinder
1. Close the cylinder valve.
2. Store the pressure regulator with the gas hose
under the barbecue. Make sure the gas hose is
not kinked or twisted in any way.
3. Store the gas cylinder correctly:
– Fit the gas cylinder valve with a cap nut and
safety cap.
Do not store the gas cylinder in rooms below
ground level, in or near stairways, hallways
or passages and thoroughfares between buil-
dings.
Always store gas cylinders upright, even if they
are empty!
Connecting the gas cylinder
1. Connect the coupling nut of the pressure regula-
tor to the cylinder valve thread and tighten the
coupling nut by turning it anti-clockwise by hand.
2. Do not use any tools for this, as the cylinder valve
seal could be damaged in the process, resulting in
leaks.
3. Make sure that the pressure regulator and the gas
hose are securely connected.
4. Check to make sure the connection between the
gas hose and adjusting element, as well as the
connections between the gas hose are secure.
Make sure that the hose is not kinked or twisted in
any way and that it is not under tension.
5. Open the cylinder valve and use a standard leak
detector to make sure that all of the connections
are tight.
– Please observe the instructions for the leak indi-
cator! Never check for leaks using a naked fla-
me. Listening for leaks is not a reliable method
of detection.
– If a leak is detected, close the cylinder valve
immediately and tighten the loose connection
or replace the leaking part. Repeat the leak
test.
6. If you do not wish to barbecue immediately, close
the cylinder valve.
Before starting
• Select a suitable, preferably wind-sheltered area
to set up the barbecue. Make sure that ...
– there are not, and will not be, any flammable
materials or substances nearby. The minimum
distance to flammable materials or substances
must be 2 m overhead and 1 m to the side of
the barbecue; the distance to flame-resistant
materials or substances must be at least 0.25 m.
– the barbecue is positioned firmly on a suffici-
ently large area. It must not be moved during
operation.
– Never lay the gas cylinder on its side.
– Do not kink the gas hose or apply a tension to it.
• Make sure that the seal in the pressure regulator
is present and intact. Do not use any additional
seals.
• When connecting the gas cylinder ensure that the-
re are no sources of ignition within a 5 m radius.
Important note: to avoid the risk of spark-over, do
not to light naked flames, do not smoke and do
not actuate the switches of electric devices (appli-
ances, lights, door bells, etc.).
Battery
1. Unscrew the cover on the battery compartment
anti-clockwise.
2. Insert a new (type AA) battery, observing correct
polarity. Use only type AA batteries.
3. Screw the cover back onto the battery compart-
ment.
+
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Landmann 12660 - Miton 4.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Landmann 12660 - Miton 4.1 in the language / languages: English as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info