685311
10
Zoom out
Zoom in
Previous page
1/20
Next page
10
Rexon PTS 4.1
Igniting the burners
Danger: gas deagration upon ignition
If unburned gas accumulates, deflagration can
occur when igniting.
Possible consequences:
This can cause severe injury or damage.
Precautions:
Do not lean over the barbecue when igniting
the gas flame.
Never re-ignite immediately if the flame goes
out, instead:
Turn the flame regulators (4 x B + C) to
"Off" to interrupt the supply of gas.
Wait for 3 minutes to ensure that any accu-
mulated gas has dissipated.
Then re-ignite the burners.
1. Open the lid on the grill unit.
Maintain the greatest possible distance from the
grill unit during the next few steps.
2. Press and turn the respective flame regulator (B+C)
anti-clockwise to the HIGH setting ("large flame").
Keep it depressed in this position. In this process,
you will hear a cracking noise caused by the Piezo
ignition and the burner ignites.
3. Ignite the other burner on the grill unit. When
doing this repeat steps 2 and 3.
4. Close the lid of the grill unit and allow the barbe-
cue to heat up at full power.
The first time you use the barbecue, heat for some
20 minutes without food so that the food-safe
coating is hardened (as with any oven).
Once the barbecue is heated up, turn the flame
regulator (B+C) to the desired heat level (flame
size).
7. You can now place your food on the grill. We
recommend that you wear barbecue mittens or
other suitable gloves for protection against the
heat.
To switch off the burners (to extinguish the ame)
press and turn the ame regulators (B+C) clockwise
to "OFF".
The gas supply is only disconnected if all the ame
regulators have been set to OFF.
Igniting the burner on the grill unit and side burner
Operation
Starting up the barbecue
1. Check to ensure that ....
there are not, and will not be, any flamma-
ble materials or substances nearby. Minimum
distance to flammable materials or substances:
2 m overhead and 1 m to the side; distance to
flame-resistant materials or substances: at least
0.25 m.
the barbecue is positioned firmly on a suffici-
ently large area. Do not move it during ope-
ration.
the barbecue is fully assembled and has no
apparent faults.
2. Open the lid of the grill unit; this prevents gas
building up underneath it.
3. Open the cylinder valve (turn G1 anti-clockwise).
4. Check to ensure that the gas system does not leak.
If it does, close the cylinder valve immediately
(turn G1 in clockwise direction).
5. Insert the grease tray (8) into shelf of the grill unit
(1).
Caution:
Observe the maximum load of the shelves (see
Technical Data). Heavier loads can damage the
barbecue.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Landmann 12234 - Rexon PTS 4.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Landmann 12234 - Rexon PTS 4.1 in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info