685311
9
Zoom out
Zoom in
Previous page
1/20
Next page
9
Rexon PTS 4.1
Disconnecting the gas cylinder
1. Close the cylinder valve (turn G2 clockwise).
2. Press G2 inwards and pull the regulator upwards.
3. Store the pressure regulator (G3) with the gas
hose (G6) under the barbecue. Make sure the gas
hose is not kinked or twisted in any way.
4. Store the gas cylinder correctly:
Do not store the gas cylinder in rooms below
ground level, in or near stairways, hallways
or passages and thoroughfares between buil-
dings.
Always store gas cylinders upright, even if they
are empty!
Connecting the gas cylinder
1. Press the regulator onto the gas cylinder outlet
Do not use any tools for this, as the cylinder valve
seal could be damaged in the process, resulting in
leaks.
2. Make sure that the pressure regulator (G5) and
the gas hose (G6) are securely connected.
3. Check to make sure the connection between the
pressure regulator (G3) and gas cylinder (G1) are
secure.
Make sure that the hose is not kinked or twisted in
any way and that it is not under tension.
4. Open the cylinder valve (turn G2 anti-clockwise)
and use a standard leak detector to make sure
that all of the connections are tight.
Please observe the instructions for the leak indi-
cator! Never check for leaks using a naked fla-
me. Listening for leaks is not a reliable method
of detection.
If a leak is detected, close the cylinder valve
immediately (turn G2 clockwise) and tighten
the loose connection or replace the leaking
part. Repeat the leak test.
5. If you do not wish to barbecue immediately, close
the cylinder valve (turn G2 clockwise).
Before starting
Select a suitable, preferably wind-sheltered area
to set up the barbecue. Make sure that ...
there are not, and will not be, any flamma-
ble materials or substances in the vicinity. The
minimum distance to flammable materials or
substances must be 2 m overhead and 1 m to
the side of the barbecue; the distance to fla-
me-resistant materials or substances must be at
least 0.25 m.
the barbecue is positioned firmly on a suffici-
ently large area. It must not be moved during
operation.
Do not use the gas cylinder in the cabinet, always-
beside the barbecue.
Never lay the gas cylinder on its side.
Do not kink the gas hose or apply a tension to
it.
Make sure that the seal in the pressure regulator
(G4) is present and intact. Do not use any additi-
onal seals.
When connecting the gas cylinder ensure that the-
re are no sources of ignition within a 5 m radius.
Important note: to avoid the risk of spark-over, do
not to light naked flames, do not smoke and do
not actuate the switches of electric devices (appli-
ances, lights, door bells, etc.).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Landmann 12234 - Rexon PTS 4.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Landmann 12234 - Rexon PTS 4.1 in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info