626348
212
Zoom out
Zoom in
Previous page
1/255
Next page
Wheel Changing
211
Using the wheel chocks
If possible, position the vehicle on level ground,
chocking both sides of the wheel diagonally
opposite the one to be removed.
If jacking the vehicle on a slope is unavoidable,
place the chocks on the downhill side of the two
opposite wheels.
The wheel chocks are stowed with the jack
handle and wheel nut spanner in the tool bag.
Assemble the wheel chocks as follows:
1. Pull the two halves of the chock apart.
2. Twist one half of the chock 180°.
3. Push the two halves back together.
Operating the jack
Slot the two parts of the jack lever together,
ensuring that the spring clip protrudes from the
engagement slot where the two parts join (see
inset ‘A’). Close the jack release valve by using
the notched end of the jack lever to turn the
valve fully clockwise (see inset ‘B’). Insert the
lever into the socket as shown (inset ‘C’) and
twist the lever to lock it into the socket.
Pump the lever up and down to raise the jack.
To lower the jack, detach the lever (twist and
pull) and then slot the notched end over the
pegs on the release valve. Slowly turn the
release valve anti-clockwise allowing the weight
of the vehicle to lower the jack.
DO NOT fully unscrew the release valve.
H3098
2
1
3
H2510
A
BC
212


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Land Rover Discovery - 2004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Land Rover Discovery - 2004 in the language / languages: English as an attachment in your email.

The manual is 6,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info